Description
xVictron SmartSolar MPPT 250/70-Tr Solar Charge Controller
The Victron SmartSolar MPPT 250/70-Tr is a solar charge controller rated for a maximum PV open-circuit voltage of 250V and a maximum charge current of 70A. It is designed for professional off-grid and hybrid solar installations where reliable battery charging and remote monitoring are required. The built-in Bluetooth and compatibility with the VictronConnect app make it well suited to trade and commercial installers who need to configure, monitor and log system data without additional hardware.
Key Features
- Maximum PV open-circuit voltage of 250V, supporting larger series-connected panel strings.
- 70A maximum charge current, suitable for substantial battery banks across 12V, 24V and 48V systems.
- Built-in Bluetooth for direct configuration and monitoring via the VictronConnect app on iOS and Android.
- True MPPT algorithm with rapid tracking, maximising energy harvest across varying irradiance conditions.
- TR (screw terminal) connection type for straightforward, secure wiring in fixed installations.
- Supports lithium-ion (LiFePO4), AGM, gel, flooded and other battery chemistries with user-configurable charge profiles.
- Compatible with the Victron GX ecosystem, enabling full system integration via VE.Direct communication port.
- Integrated load output for direct connection of DC loads with programmable control.
Product Overview
The SmartSolar MPPT 250/70-Tr accepts PV array voltages up to 250V open-circuit, which allows installers to wire panels in longer series strings before parallel combining. This reduces cable losses and simplifies array wiring on larger rooftop or ground-mount systems. The 70A output is sufficient to fully charge a 48V battery bank from a PV array of up to approximately 3,500W, depending on system voltage and conditions.
The built-in Bluetooth removes the need for a separate Bluetooth dongle. Using VictronConnect, installers can set charge parameters, view live data, access historical yield logs and run a battery equalisation cycle directly from a phone or tablet. For permanent remote monitoring, the VE.Direct port connects to a Victron GX device (such as a Cerbo GX), enabling full integration with the VRM online portal. The controller does not require a GX device to function, but the combination provides comprehensive system oversight for professional installations.
Charge algorithm selection covers the full range of common battery chemistries. For lithium batteries, a dedicated LiFePO4 profile is available, and the controller can accept a BMS signal to halt charging when required. The TR terminal variant uses screw-type connections on both the PV and battery sides, which are the standard choice for permanent, fixed wiring in enclosures or distribution boards.
Technical Specifications
| Specification | Value |
| SKU | SCC125070221 |
| Maximum PV Open-Circuit Voltage | 250V |
| Maximum Charge Current | 70A |
| Compatible Battery Voltages | 12V, 24V, 48V |
| Connection Type | TR (screw terminals) |
| Communication | Built-in Bluetooth, VE.Direct |
| Weight | 3.2 kg |
| GTIN | 8719076050865 |
Applications
- Off-grid cabins, lodges and rural properties with 12V, 24V or 48V battery systems.
- Commercial off-grid installations requiring high PV input voltage and substantial charge current.
- Marine and vehicle applications where a high-voltage PV array feeds a 12V or 24V service battery bank.
- Hybrid solar systems integrated with a Victron GX device and VRM monitoring.
- Backup power systems with lithium or lead-acid battery banks requiring precise charge management.
- Agricultural and telecoms sites with remote monitoring requirements via VRM.
What Is Included
- Victron SmartSolar MPPT 250/70-Tr charge controller (1 unit)
Installation Notes
This controller handles PV voltages up to 250V, which is classified as low voltage DC but still presents a shock and arc-flash risk. Installation should be carried out by a qualified electrician or MCS-accredited solar installer. Ensure the PV open-circuit voltage does not exceed 250V under any temperature condition, including cold-start scenarios where Voc rises. Battery polarity must be connected correctly before any PV connection is made. For systems connected to a Victron GX device and the VRM portal, a stable internet connection at the site is required for remote monitoring. Lithium battery installations must use a compatible BMS with the appropriate charge enable signal.
Return Policy
xWe offer a 14-day, no-quibble returns or replacement policy because we want you to be totally satisfied with your purchase.
If you are unhappy in any way with your purchase, you can return it for a refund or a replacement, as long as you return it in the same condition as it arrived (original/undamaged packaging and product) and within 30 days of receiving it. We will pay for your return postage on a faulty item as long as you send it using our UPS account (we will provide you with a return label)
Please keep in mind the following:
- Items returned within 14 days but not in their original and undamaged packaging will also incur a -15% charge per package.
- If you return an item that doesn't adhere to our returns procedure or doesn't include a returns form, you may be liable for a €10 administration fee
- Individual items from a bundle can't be returned, refunded or exchanged. If you want a refund/credit/exchange for a bundle, all items must be returned to us.
Before you return your item, please make sure that:
- You follow our returns process (outlined below)
- The goods and packaging are undamaged
IMPORTANT: We need to be able to identify an item with your order. We can only do this if you follow our returns process. Please do not send us items back that do not follow this process as they cannot be identified properly and will not be replaced or refunded.
What delivery method do I need to use when returning an item?
You must send the goods back to us by a tracked/recorded delivery service. Refunds on faulty items returned are reimbursed within 5 working days.
Can I return just one item from multiple purchases?
Yes. Once you start the returns process you will go to a page that will allow you to choose which items you want to be replaced or refunded.
Returning faulty goods
If your item is faulty, you need to follow the returns policy, where you will be able to state that it’s faulty. The product will then arrive at our warehouse for testing.
If your purchase is not within 14 days
You can still exchange your item for a different product or for credit to use on the Voltacon Solar website (-15% from the credit amount).
Returns outside of the 14-day period do not qualify for the free returns policy.
Returning an item within the warranty
If you have a warranty and want to return a faulty item, you just need to follow our standard returns process. When we receive your item, we will then check that it’s within warranty and for any faults before arranging a replacement.