Description
xVictron Quattro 24/3000/70-50/50 230V VE.Bus Inverter Charger
The Victron Quattro 24/3000/70-50/50 is a combined inverter and dual-input battery charger designed for off-grid, marine, vehicle and backup power installations. It accepts two separate AC inputs, manages power sources automatically, and delivers 3000VA of continuous AC output from a 24V battery bank. It is aimed at professional installers working on systems that require reliable source switching and robust charging capability.
Key Features
- Dual AC input connections allow simultaneous connection of two sources, such as shore power and a generator, with automatic switching between them.
- 3000VA continuous inverter output at 230V AC, suitable for powering standard single-phase loads.
- 70A multi-stage battery charger with adaptive charge algorithm, operating from a 24V battery bank.
- Two 50A AC pass-through outputs allow direct load connection from whichever AC input is active, without drawing from the battery.
- PowerControl and PowerAssist functions limit total current draw from an AC source and supplement it with battery power when loads exceed the input limit.
- VE.Bus communication interface enables system integration with Victron GX devices, remote monitoring via VRM, and multi-unit parallel or three-phase configuration.
- Virtually no transfer time when switching from inverter to AC input, making it suitable for sensitive equipment.
Product Overview
The Quattro differs from a standard inverter charger by providing two independent AC inputs rather than one. In practice, this means you can wire shore power to input 1 and a generator to input 2. The unit monitors both sources and switches to whichever is available, with input 1 taking priority. If neither source is present, it inverts from the battery automatically. This removes the need for manual changeover switches and reduces the risk of back-feeding a generator or shore supply.
PowerAssist is particularly useful in installations where the available AC supply is limited, such as a marina berth with a 16A shore connection or a small generator. When loads exceed what the input can supply, the Quattro draws the difference from the battery rather than tripping the supply breaker. This allows a 24V system to support peak loads that would otherwise require a larger generator or supply circuit.
VE.Bus connectivity means the Quattro integrates directly with Victron GX devices (Cerbo GX, Color Control GX) for full system monitoring and control. Multiple Quattro units can be configured in parallel for increased capacity, or in split-phase and three-phase arrangements where the installation demands it. Configuration and firmware updates are handled via VE.Configure software using a VE.Bus to USB interface.
Technical Specifications
| Parameter | Value |
| SKU | QUA243020010 |
| Battery Voltage | 24V |
| Inverter Output Power | 3000VA |
| AC Output Voltage | 230V AC |
| Charger Output Current | 70A |
| AC Input Current (Input 1 / Input 2) | 50A / 50A |
| Number of AC Inputs | 2 |
| Communication Interface | VE.Bus |
| AC Output Frequency | 50Hz |
| Weight | 20 kg |
| GTIN | 8719076024149 |
Applications
- Off-grid cabins and buildings where a generator supplements a solar battery system and automatic source switching is required.
- Marine vessels with both shore power and a generator, requiring seamless changeover and battery charging from either source.
- Motorhomes and large vehicles with 24V battery systems needing mains-quality AC output and dual-source charging.
- Backup power systems for commercial or industrial premises where generator and grid inputs must both be managed.
- Multi-unit parallel installations where higher output capacity is needed beyond a single unit's rating.
What Is Included
- Victron Quattro 24/3000/70-50/50 230V VE.Bus inverter charger unit
Installation Notes
The Quattro 24/3000/70-50/50 must be installed by a qualified electrician familiar with battery-based inverter systems. At 24V with a 70A charger and 3000VA inverter output, cable sizing, fusing and battery bank capacity must be calculated correctly to ensure safe operation. Connection to a generator or grid supply must comply with current UK wiring regulations. For any grid-tied or grid-backup application in the UK, confirm compliance requirements with your DNO before commissioning. VE.Configure software and a VE.Bus to USB interface are required for full configuration; these are not included in the box.
Return Policy
xWe offer a 14-day, no-quibble returns or replacement policy because we want you to be totally satisfied with your purchase.
If you are unhappy in any way with your purchase, you can return it for a refund or a replacement, as long as you return it in the same condition as it arrived (original/undamaged packaging and product) and within 30 days of receiving it. We will pay for your return postage on a faulty item as long as you send it using Royal Mail 2nd class recorded delivery (for EU or International Shipments, you have to use our UPS account, we will provide you with a return label)
Please keep in mind the following:
- Non-faulty items returned after 14 days and/or not in their original, undamaged packaging can only be exchanged for store credit - 15% off the items returned.
- Items returned within 14 days but not in their original and undamaged packaging will also incur a -15% charge per package.
- If you return an item that doesn't adhere to our returns procedure or doesn't include a returns form, you may be liable for a £10 administration fee
- Individual items from a bundle can't be returned, refunded or exchanged. If you want a refund/credit/exchange for a bundle, all items must be returned to us.
Before you return your item, please make sure that:
- You follow our returns process (outlined below)
- The goods and packaging are undamaged
IMPORTANT: We need to be able to identify an item with your order. We can only do this if you follow our returns process. Please do not send us items back that do not follow this process as they cannot be identified properly and will not be replaced or refunded.
What delivery method do I need to use when returning an item?
You must send the goods back to us via Royal Mail 2nd class recorded delivery. Refunds on faulty items returned are reimbursed within 5 working days.
Can I return just one item from multiple purchases?
Yes. Once you start the returns process you will go to a page that will allow you to choose which items you want to be replaced or refunded.
Returning faulty goods
If your item is faulty, you need to follow the returns policy, where you will be able to state that it’s faulty. The product will then arrive at our warehouse for testing.
If your purchase is not within 14 days
You can still exchange your item for a different product or for credit to use on the Voltacon Solar or Ledison-led-lights.co.uk websites (-15% from the credit amount).
Returns outside of the 14-day period do not qualify for the free returns policy.
Returning an item within the warranty
If you have a warranty and want to return a faulty item, you just need to follow our standard returns process. When we receive your item, we will then check that it’s within warranty and for any faults before arranging a replacement.