Description
xVictron Orion-Tr Smart 48/24-16A (380W) Isolated DC-DC Charger
The Orion-Tr Smart 48/24-16A is a galvanically isolated DC-DC converter and battery charger designed for professional dual-battery and vehicle-based systems. It steps a 48V supply down to a regulated 24V output at up to 16A (380W), with Bluetooth-based configuration and monitoring built in. Suitable for marine, off-grid vehicle and industrial applications where electrical isolation between circuits is required.
Key Features
- Galvanic isolation between input and output eliminates ground loop issues and protects sensitive electronics on the output circuit.
- Bluetooth Smart built in: configure charge profiles, monitor status and adjust settings via the VictronConnect app on iOS or Android.
- Adaptive 3-stage charging (bulk, absorption, float) with selectable battery presets including lithium, AGM and gel.
- Input voltage range of 38V to 60V DC accommodates varying 48V battery states without shutting down prematurely.
- Output voltage is adjustable, allowing fine-tuning to match the requirements of the connected 24V battery bank.
- Engine start detection: the unit can be configured to activate only when the alternator is charging, protecting the starter battery.
- Compact, fully encapsulated housing rated for harsh environments including moisture and vibration.
Product Overview
The Orion-Tr Smart operates as a true battery-to-battery charger, not simply a voltage reducer. It applies a proper multi-stage charge algorithm to the output battery, which matters in systems where the secondary battery needs to reach full charge rather than just float. This is particularly relevant for lithium batteries, which require precise charge termination that a simple DC-DC converter cannot provide.
Galvanic isolation is a practical requirement in many marine and vehicle installations. Without it, connecting two battery banks directly can create ground loops that cause corrosion, interference or fault currents. The Orion-Tr Smart's transformer-based isolation eliminates this risk. The unit also supports parallel operation: two or more units can be connected in parallel to increase output current where a higher charge rate is needed.
VictronConnect Bluetooth configuration means no separate programming cable or interface is required. Installers can set the charge profile, adjust voltage thresholds and review historical data directly from a phone or tablet. The unit also integrates with the wider Victron ecosystem via a VE.Direct port, enabling monitoring through a GX device or the VRM portal.
Technical Specifications
| Parameter | Value |
| SKU | ORI482438120 |
| Input Voltage (nominal) | 48V DC |
| Output Voltage (nominal) | 24V DC |
| Output Current | 16A |
| Output Power | 380W |
| Galvanic Isolation | Yes |
| Bluetooth | Built-in (VictronConnect) |
| Communication Port | VE.Direct |
| Weight | 1.8 kg |
| GTIN | 8719076065593 |
Applications
- Charging a 24V service battery bank from a 48V traction or house battery in electric vehicles and campervans.
- Marine dual-battery systems where galvanic isolation is required to prevent corrosion and ground faults.
- Off-grid cabins and mobile installations with a 48V primary system needing a regulated 24V supply for secondary loads or batteries.
- Industrial vehicles and equipment with mixed 48V and 24V electrical architectures.
- Telecom and remote monitoring installations requiring isolated, regulated DC power conversion.
What Is Included
- 1x Victron Orion-Tr Smart 48/24-16A (380W) Isolated DC-DC Charger
Installation Notes
Installation should be carried out by a qualified electrician or experienced system integrator familiar with DC power systems. Ensure input and output wiring is correctly rated for the current and voltage involved. The unit must be mounted in a well-ventilated location and secured against vibration in mobile applications. For marine installations, follow NMEA and flag-state wiring standards. Engine start detection wiring should be verified before commissioning to avoid unintended battery drain.
Return Policy
xWe offer a 14-day, no-quibble returns or replacement policy because we want you to be totally satisfied with your purchase.
If you are unhappy in any way with your purchase, you can return it for a refund or a replacement, as long as you return it in the same condition as it arrived (original/undamaged packaging and product) and within 30 days of receiving it. We will pay for your return postage on a faulty item as long as you send it using Royal Mail 2nd class recorded delivery (for EU or International Shipments, you have to use our UPS account, we will provide you with a return label)
Please keep in mind the following:
- Non-faulty items returned after 14 days and/or not in their original, undamaged packaging can only be exchanged for store credit - 15% off the items returned.
- Items returned within 14 days but not in their original and undamaged packaging will also incur a -15% charge per package.
- If you return an item that doesn't adhere to our returns procedure or doesn't include a returns form, you may be liable for a £10 administration fee
- Individual items from a bundle can't be returned, refunded or exchanged. If you want a refund/credit/exchange for a bundle, all items must be returned to us.
Before you return your item, please make sure that:
- You follow our returns process (outlined below)
- The goods and packaging are undamaged
IMPORTANT: We need to be able to identify an item with your order. We can only do this if you follow our returns process. Please do not send us items back that do not follow this process as they cannot be identified properly and will not be replaced or refunded.
What delivery method do I need to use when returning an item?
You must send the goods back to us via Royal Mail 2nd class recorded delivery. Refunds on faulty items returned are reimbursed within 5 working days.
Can I return just one item from multiple purchases?
Yes. Once you start the returns process you will go to a page that will allow you to choose which items you want to be replaced or refunded.
Returning faulty goods
If your item is faulty, you need to follow the returns policy, where you will be able to state that it’s faulty. The product will then arrive at our warehouse for testing.
If your purchase is not within 14 days
You can still exchange your item for a different product or for credit to use on the Voltacon Solar or Ledison-led-lights.co.uk websites (-15% from the credit amount).
Returns outside of the 14-day period do not qualify for the free returns policy.
Returning an item within the warranty
If you have a warranty and want to return a faulty item, you just need to follow our standard returns process. When we receive your item, we will then check that it’s within warranty and for any faults before arranging a replacement.