Description
xVictron Orion-Tr Smart 48/12-30A (360W) Isolated DC-DC Charger
The Orion-Tr Smart 48/12-30A is a galvanically isolated DC-DC charger that converts a 48V supply down to a 12V charging output at up to 30A (360W). It is designed for professional installations where a secondary 12V battery needs to be charged from a 48V house bank, traction battery or DC bus, without an electrical connection between the two circuits. Built-in Bluetooth allows configuration and monitoring via the VictronConnect app without additional hardware.
Key Features
- Galvanic isolation between input and output eliminates ground loop issues and protects both battery banks from cross-contamination of faults.
- 48V input to 12V output conversion at 30A continuous, delivering up to 360W of charging power.
- Integrated Bluetooth with VictronConnect app support for configuration, monitoring and firmware updates from a smartphone or tablet.
- Adaptive 3-stage charging algorithm (bulk, absorption, float) ensures correct charge management for the secondary battery.
- Wide input voltage range accommodates real-world 48V systems, including those with variable bus voltage under load.
- Engine detection input allows the unit to activate only when the alternator or engine is running, protecting the source battery from discharge.
- Compact, wall-mountable aluminium enclosure rated for permanent installation in vehicles, vessels and fixed off-grid systems.
Product Overview
The Orion-Tr Smart range differs from basic DC-DC converters by incorporating a proper multi-stage battery charging profile rather than simply regulating output voltage. This matters in practice because a flat secondary battery will draw maximum current until it reaches absorption voltage, then taper off correctly, rather than being held at a fixed voltage that either undercharges or stresses the battery. The result is longer battery life and a fully charged auxiliary bank.
Galvanic isolation is a key specification for many installations. On boats, it prevents stray current corrosion between separate battery systems. In vehicles with dual battery setups, it avoids chassis ground conflicts. In 48V off-grid or telecom systems feeding 12V auxiliary loads, it provides a clean separation that simplifies fault-finding and meets installation best practice. The transformer-based isolation in the Orion-Tr Smart is not a software feature; it is a physical barrier built into the converter topology.
VictronConnect Bluetooth is built in as standard. There is no need for a separate interface dongle or wired connection to set charge voltages, absorption time, or engine detection behaviour. The unit can also be integrated into a wider Victron system via a VE.Direct connection, allowing data to be logged through a GX device or the VRM portal.
Specifications
- SKU: ORI481238120
- Input voltage: 48V nominal
- Output voltage: 12V (adjustable)
- Output current: 30A continuous
- Output power: 360W
- Isolation: Galvanic (transformer-based)
- Communication: Bluetooth (VictronConnect), VE.Direct
- Weight: 1.8 kg
- GTIN: 8719076065586
Applications
- Charging a 12V service or auxiliary battery from a 48V lithium house bank in marine or motorhome installations.
- Supplying 12V loads and batteries from a 48V off-grid DC bus in cabins, shelters or remote installations.
- Powering 12V control circuits or auxiliary systems in 48V electric vehicle or golf cart conversions.
- Feeding 12V instrumentation or communications equipment from a 48V telecom or industrial DC supply.
- Dual-battery systems where galvanic isolation is required to prevent ground loop interference or stray current corrosion.
What Is Included
- Orion-Tr Smart 48/12-30A isolated DC-DC charger unit
- Mounting hardware
Installation Notes
This unit should be installed by a qualified electrician or experienced system integrator familiar with DC power systems. Correct cable sizing and fusing on both the input and output sides is essential at these current levels. The engine detection input must be wired correctly if source battery protection is required. For marine installations, follow applicable wiring standards for the vessel type. VictronConnect (iOS or Android) is required for initial configuration and is available as a free download.
Return Policy
xWe offer a 14-day, no-quibble returns or replacement policy because we want you to be totally satisfied with your purchase.
If you are unhappy in any way with your purchase, you can return it for a refund or a replacement, as long as you return it in the same condition as it arrived (original/undamaged packaging and product) and within 30 days of receiving it. We will pay for your return postage on a faulty item as long as you send it using our UPS account (we will provide you with a return label)
Please keep in mind the following:
- Items returned within 14 days but not in their original and undamaged packaging will also incur a -15% charge per package.
- If you return an item that doesn't adhere to our returns procedure or doesn't include a returns form, you may be liable for a €10 administration fee
- Individual items from a bundle can't be returned, refunded or exchanged. If you want a refund/credit/exchange for a bundle, all items must be returned to us.
Before you return your item, please make sure that:
- You follow our returns process (outlined below)
- The goods and packaging are undamaged
IMPORTANT: We need to be able to identify an item with your order. We can only do this if you follow our returns process. Please do not send us items back that do not follow this process as they cannot be identified properly and will not be replaced or refunded.
What delivery method do I need to use when returning an item?
You must send the goods back to us by a tracked/recorded delivery service. Refunds on faulty items returned are reimbursed within 5 working days.
Can I return just one item from multiple purchases?
Yes. Once you start the returns process you will go to a page that will allow you to choose which items you want to be replaced or refunded.
Returning faulty goods
If your item is faulty, you need to follow the returns policy, where you will be able to state that it’s faulty. The product will then arrive at our warehouse for testing.
If your purchase is not within 14 days
You can still exchange your item for a different product or for credit to use on the Voltacon Solar website (-15% from the credit amount).
Returns outside of the 14-day period do not qualify for the free returns policy.
Returning an item within the warranty
If you have a warranty and want to return a faulty item, you just need to follow our standard returns process. When we receive your item, we will then check that it’s within warranty and for any faults before arranging a replacement.