Description
xVictron MultiPlus 48/3000/35-16 230V VE.Bus Inverter Charger
The Victron MultiPlus 48/3000/35-16 is a combined inverter and battery charger in a single unit, designed for 48V battery systems operating at 230V AC. It is suited to off-grid installations, backup power systems, and marine or vehicle applications where reliable AC output and intelligent charging are required in one compact unit.
Key Features
- 3000VA continuous inverter output at 230V AC from a 48V DC battery bank.
- 35A battery charger with adaptive charge algorithm to suit a range of battery chemistries.
- 16A AC transfer switch for seamless changeover between shore/generator power and inverter output.
- PowerControl function limits the load on the AC input, preventing generator or shore supply overload.
- PowerAssist function supplements AC input with battery power during peak demand, allowing a smaller generator or shore connection to be used.
- VE.Bus communication interface for system integration, parallel operation, and three-phase configuration.
- Supports parallel and three-phase operation: multiple units can be combined to increase capacity or create a three-phase system.
- Built-in battery temperature sensor input and programmable relay for system control.
Product Overview
The MultiPlus 48/3000/35-16 combines a pure sine wave inverter with a multi-stage battery charger. The inverter produces a clean 230V AC sine wave output, making it compatible with sensitive loads including motors, compressors, and electronic equipment. The 35A charger uses an adaptive algorithm that adjusts charge parameters based on battery behaviour, which helps extend battery life over time.
The 16A AC transfer switch connects the unit to a shore power or generator supply. When AC input is available, the MultiPlus passes power through to connected loads and charges the battery simultaneously. On loss of AC input, the transfer to inverter operation takes less than 20 milliseconds, which is fast enough to keep most computers and sensitive equipment running without interruption. PowerControl and PowerAssist allow the unit to work within the limits of a restricted AC supply, drawing from the battery when demand exceeds what the input can provide.
VE.Bus connectivity allows the MultiPlus to be configured and monitored using Victron's VEConfigure software and integrated into larger systems via a GX device such as the Cerbo GX. Multiple units can be connected in parallel for higher output capacity, or configured for split-phase or three-phase operation. This makes the MultiPlus a practical building block for scalable off-grid and backup power systems.
Technical Specifications
| Parameter | Value |
| SKU | PMP483020001 |
| Inverter Output Power | 3000VA / 2400W continuous |
| DC Input Voltage (Nominal) | 48V |
| AC Output Voltage | 230V AC |
| AC Output Frequency | 50Hz / 60Hz (selectable) |
| Output Waveform | Pure sine wave |
| Battery Charger Output | 35A |
| AC Transfer Switch | 16A |
| Transfer Time (Inverter) | Less than 20ms |
| Communication Interface | VE.Bus |
| Weight | 18 kg |
| GTIN | 8719076024040 |
Applications
- Off-grid residential and cabin systems with a 48V battery bank.
- Backup power for critical loads where fast transfer time is required.
- Marine and narrowboat installations requiring 230V AC from a 48V DC system.
- Vehicle and mobile power systems (large vehicles, expedition builds).
- Generator-supplemented systems where PowerAssist reduces generator run time.
- Scalable installations where multiple units are paralleled or configured for three-phase output.
What Is Included
- Victron MultiPlus 48/3000/35-16 230V VE.Bus inverter charger unit.
Installation Notes
The MultiPlus 48/3000/35-16 should be installed by a qualified electrician familiar with DC battery systems and AC wiring. At 48V DC with a 3000VA output, the unit draws significant DC current and requires correctly rated cabling, fusing, and a suitable battery bank. For any grid-connected or generator-connected application, ensure the installation complies with current UK wiring regulations (BS 7671) and any applicable network operator requirements. VE.Bus configuration requires Victron's VEConfigure software and a suitable interface cable or MK3-USB adapter. If integrating into a larger Victron system with a GX device, ensure firmware compatibility across all connected components before commissioning.
Return Policy
xWe offer a 14-day, no-quibble returns or replacement policy because we want you to be totally satisfied with your purchase.
If you are unhappy in any way with your purchase, you can return it for a refund or a replacement, as long as you return it in the same condition as it arrived (original/undamaged packaging and product) and within 30 days of receiving it. We will pay for your return postage on a faulty item as long as you send it using Royal Mail 2nd class recorded delivery (for EU or International Shipments, you have to use our UPS account, we will provide you with a return label)
Please keep in mind the following:
- Non-faulty items returned after 14 days and/or not in their original, undamaged packaging can only be exchanged for store credit - 15% off the items returned.
- Items returned within 14 days but not in their original and undamaged packaging will also incur a -15% charge per package.
- If you return an item that doesn't adhere to our returns procedure or doesn't include a returns form, you may be liable for a £10 administration fee
- Individual items from a bundle can't be returned, refunded or exchanged. If you want a refund/credit/exchange for a bundle, all items must be returned to us.
Before you return your item, please make sure that:
- You follow our returns process (outlined below)
- The goods and packaging are undamaged
IMPORTANT: We need to be able to identify an item with your order. We can only do this if you follow our returns process. Please do not send us items back that do not follow this process as they cannot be identified properly and will not be replaced or refunded.
What delivery method do I need to use when returning an item?
You must send the goods back to us via Royal Mail 2nd class recorded delivery. Refunds on faulty items returned are reimbursed within 5 working days.
Can I return just one item from multiple purchases?
Yes. Once you start the returns process you will go to a page that will allow you to choose which items you want to be replaced or refunded.
Returning faulty goods
If your item is faulty, you need to follow the returns policy, where you will be able to state that it’s faulty. The product will then arrive at our warehouse for testing.
If your purchase is not within 14 days
You can still exchange your item for a different product or for credit to use on the Voltacon Solar or Ledison-led-lights.co.uk websites (-15% from the credit amount).
Returns outside of the 14-day period do not qualify for the free returns policy.
Returning an item within the warranty
If you have a warranty and want to return a faulty item, you just need to follow our standard returns process. When we receive your item, we will then check that it’s within warranty and for any faults before arranging a replacement.