Description
xVictron MultiPlus 48/20000/250-100 230V Inverter Charger
The Victron MultiPlus 48/20000/250-100 is a high-capacity 20kVA inverter charger designed for demanding off-grid, backup and large-scale energy storage installations. Operating on a 48V DC battery bank and delivering 230V AC output, it combines a pure sine wave inverter with a 250A battery charger in a single unit. This unit is suited to commercial, industrial and large residential installations where high continuous power output is required.
Key Features
- 20kVA continuous inverter output at 230V AC from a 48V DC battery bank.
- Integrated 250A battery charger with adaptive charge algorithm to suit a range of battery chemistries.
- PowerControl function limits generator or shore power draw, preventing overload of the AC source.
- PowerAssist technology supplements AC input with battery power during peak demand, allowing use of a smaller generator or grid connection.
- Pure sine wave output suitable for sensitive loads including motors, compressors and medical equipment.
- Supports parallel and three-phase operation: up to six units can be connected in parallel, and three units can be configured for three-phase output.
- Transfer switch with a typical switchover time of less than 20 milliseconds, suitable for most UPS-sensitive equipment.
- Compatible with Victron VE.Bus for system integration, remote monitoring and configuration via VictronConnect or Venus OS devices.
Product Overview
The MultiPlus 48/20000/250-100 is one of the largest single-unit inverter chargers in the Victron MultiPlus range. At 20kVA, it is built for installations where load demands exceed what smaller inverter chargers can handle: large commercial premises, off-grid agricultural facilities, marine vessels, and critical backup systems. The 48V DC input voltage is the standard choice at this power level, keeping DC cable currents manageable and improving overall system efficiency compared to lower voltage configurations.
The 250A charger stage is substantial enough to recharge a large battery bank from a generator within a practical timeframe. PowerControl ensures the charger automatically reduces its current draw if the AC source approaches its rated limit, protecting generators and shore power connections from overload. PowerAssist works in the opposite direction: when loads spike beyond what the AC source can supply alone, the inverter draws from the battery to cover the shortfall, then recharges when demand drops. This allows a correctly sized generator to run loads that would otherwise exceed its capacity.
Multiple units can be paralleled for higher output, or configured in a three-phase arrangement for commercial and industrial sites with three-phase load requirements. System configuration and monitoring is handled via VE.Bus, with full integration into the Victron ecosystem including Cerbo GX, Color Control GX and remote monitoring through the VRM portal. At 63.5kg, installation requires appropriate lifting equipment and a suitably rated mounting structure.
Technical Specifications
| Parameter | Value |
| SKU | PMC483200400 |
| Model | MultiPlus 48/20000/250-100 230V |
| DC Input Voltage | 48V |
| Inverter Output Power | 20,000VA (20kVA) |
| AC Output Voltage | 230V |
| Battery Charger Output | 250A |
| AC Pass-Through | 100A |
| Output Waveform | Pure sine wave |
| Transfer Time | Less than 20ms (typical) |
| Communication | VE.Bus |
| Weight | 63.5kg |
| GTIN | 8719076068358 |
Applications
- Large off-grid commercial and agricultural installations requiring high continuous AC output.
- Critical backup power systems for industrial facilities, data centres and telecoms infrastructure.
- Marine and large vessel installations with substantial AC load requirements.
- Three-phase system configurations when used with two additional MultiPlus units.
- High-capacity battery energy storage systems (BESS) paired with large solar arrays.
- Generator-backed systems where PowerControl and PowerAssist reduce generator sizing requirements.
What Is Included
- 1x Victron MultiPlus 48/20000/250-100 230V inverter charger unit.
Installation Notes
At 20kVA and 63.5kg, this unit must be installed by a qualified electrician with experience in high-power inverter systems. DC cabling to the battery bank must be rated for the full charge and discharge currents at 48V. Appropriate fusing and disconnection devices are required on both the DC and AC sides. For any grid-connected application in the UK, the installation must comply with G98 or G99 requirements as applicable, and must be carried out by an MCS-accredited installer or a suitably qualified engineer. High-capacity battery systems, particularly lithium-based banks, require specialist commissioning. Mechanical installation requires suitable lifting equipment given the unit weight.
Specifications
x| Specification | Value |
|---|---|
| Model | MultiPlus 230V 48/20k/250-100 |
| Part Number | PMC483200400 |
| PowerControl & PowerAssist | Yes |
| Transfer switch | 100 A |
| Maximum AC input current | 100 A |
| Inverter | |
| DC input voltage range | 38-60 V |
| Output voltage | 230 VAC ± 2 % |
| Output frequency | 50 Hz ± 0.1 % |
| Continuous output power at 25 °C | 20 kW |
| Continuous output power at 40 °C | 18 kW |
| Continuous output power at 65 °C | 14 kW |
| Max apparent feed-in power | 20 kW |
| Time limited output power (cold start) | 21 kW for 5 hour |
| Peak power | 25 kW for 1 min |
| Maximum efficiency | 96% |
| Zero load power | 65 W |
| Zero load power in AES mode | 40 W |
| Zero load power in Search mode | 13 W |
| Charger | |
| AC input voltage range | 187-265 VAC |
| AC input frequency range | 45-65 Hz |
| Charge voltage absorption | 57.6 V |
| Charge voltage float | 55.2 V |
| Storage mode | 52.8 V |
| Max battery charge current at 25 °C | 250 A |
| Max battery charge current at 40 °C | 240 A |
| Battery temperature sensor | Yes |
| General | |
| Auxiliary output | Yes (50 A) |
| External AC current sensor (optional) | 100 A |
| Programmable relay | Yes |
| Protection | a - g |
| VE.Bus communication port | For parallel and three phase operation, remote monitoring and system integration |
| General purpose communication port | Yes, 2x |
| Remote on-off | Yes |
| Operating temperature range | -40 to +65 °C (fan assisted cooling) |
| Humidity (non-condensing) | max 95 % |
| Maximum altitude | 2000 m |
| Enclosure | |
| Material & colour | Aluminium |
| Colour | Blue RAL 5012 |
| Protection category | IP20 |
| Battery connection | Four M8 bolts (2 plus and 2 minus) |
| 230 VAC connection | Bolts M6 |
| Weight | 80 kg |
| Dimensions (H x W x D) | 616 x 422 x 357 mm |
| Standards | |
| Safety | EN-IEC 60335-1, EN-IEC 60335-2-29, EN-IEC 62109-1 |
| Emission, Immunity | EN-IEC 61000-6-2, EN-IEC 61000-6-4 |
| Uninterruptible power supply | Please consult the certificates on our website |
| Anti-islanding | Please consult the certificates on our website |
Notes
1) Output frequency can be adjusted to 60 Hz.
2) Protection key:
- a) output short circuit
- b) overload
- c) battery voltage too high
- d) battery voltage too low
- e) temperature too high
- f) 230 VAC on inverter output
- g) input voltage ripple too high
3) Programmable relay can be set for general alarm, DC under voltage or genset start/stop function. AC rating: 230V / 4 A. DC rating: 4 A up to 35VDC and 1 A up to 60VDC.
Monitoring and control options shown on the datasheet
- Digital Multi Control Panel
- Ekrano GX or Cerbo GX
- VRM app
- VRM Portal
- VE.Bus Smart Dongle
- Interface MK3-USB
- VictronConnect app
- Current Transformer for MultiPlus-II, 100A or 400A
Return Policy
xWe offer a 14-day, no-quibble returns or replacement policy because we want you to be totally satisfied with your purchase.
If you are unhappy in any way with your purchase, you can return it for a refund or a replacement, as long as you return it in the same condition as it arrived (original/undamaged packaging and product) and within 30 days of receiving it. We will pay for your return postage on a faulty item as long as you send it using Royal Mail 2nd class recorded delivery (for EU or International Shipments, you have to use our UPS account, we will provide you with a return label)
Please keep in mind the following:
- Non-faulty items returned after 14 days and/or not in their original, undamaged packaging can only be exchanged for store credit - 15% off the items returned.
- Items returned within 14 days but not in their original and undamaged packaging will also incur a -15% charge per package.
- If you return an item that doesn't adhere to our returns procedure or doesn't include a returns form, you may be liable for a £10 administration fee
- Individual items from a bundle can't be returned, refunded or exchanged. If you want a refund/credit/exchange for a bundle, all items must be returned to us.
Before you return your item, please make sure that:
- You follow our returns process (outlined below)
- The goods and packaging are undamaged
IMPORTANT: We need to be able to identify an item with your order. We can only do this if you follow our returns process. Please do not send us items back that do not follow this process as they cannot be identified properly and will not be replaced or refunded.
What delivery method do I need to use when returning an item?
You must send the goods back to us via Royal Mail 2nd class recorded delivery. Refunds on faulty items returned are reimbursed within 5 working days.
Can I return just one item from multiple purchases?
Yes. Once you start the returns process you will go to a page that will allow you to choose which items you want to be replaced or refunded.
Returning faulty goods
If your item is faulty, you need to follow the returns policy, where you will be able to state that it’s faulty. The product will then arrive at our warehouse for testing.
If your purchase is not within 14 days
You can still exchange your item for a different product or for credit to use on the Voltacon Solar or Ledison-led-lights.co.uk websites (-15% from the credit amount).
Returns outside of the 14-day period do not qualify for the free returns policy.
Returning an item within the warranty
If you have a warranty and want to return a faulty item, you just need to follow our standard returns process. When we receive your item, we will then check that it’s within warranty and for any faults before arranging a replacement.