Description
xVictron MultiPlus 24/1600/40-16 230V VE.Bus Inverter Charger
The Victron MultiPlus 24/1600/40-16 is a combined inverter and battery charger in a single unit, designed for 24V battery systems with a 230V AC output. It is suited to off-grid installations, marine and vehicle applications, and backup power systems where a compact, reliable inverter charger is required.
Key Features
- 1600VA continuous inverter output at 230V AC from a 24V DC battery bank.
- 40A three-stage battery charger (bulk, absorption, float) built in, with adaptive charge algorithm.
- 16A AC transfer switch allows connection to shore power or a generator, with automatic switchover.
- PowerAssist function supplements shore or generator power with battery power to prevent overload on limited AC sources.
- VE.Bus communication port enables system integration, remote monitoring, and parallel or three-phase configuration with additional units.
- Virtually no-break transfer time when switching between inverter and mains supply, suitable for most sensitive loads.
- Programmable relay and configurable charge settings via VE.Configure software.
Product Overview
The MultiPlus 24/1600/40-16 combines a pure sine wave inverter with a high-current battery charger and an automatic transfer switch. When AC input is available from shore power or a generator, the unit passes power through to connected loads and simultaneously charges the battery bank. When AC input is lost or disconnected, it switches to inverter mode with a transfer time fast enough for most computers and sensitive electronics.
The 40A charger uses Victron's adaptive three-stage algorithm, which adjusts absorption time based on the previous discharge depth. This reduces unnecessary charge time and extends battery life over repeated cycles. The PowerAssist feature is particularly useful in installations where the available AC supply is limited, such as a 16A shore connection on a boat or a small generator. The unit draws from the battery to supplement the incoming supply rather than tripping the breaker.
VE.Bus connectivity allows the MultiPlus to be configured using VE.Configure software and monitored via a GX device such as the Cerbo GX. Multiple units can be connected in parallel for increased capacity, or configured for split-phase or three-phase output where the installation demands it.
Technical Specifications
| Parameter | Value |
| SKU | PMP242160000 |
| Battery Voltage | 24V DC |
| Inverter Output | 1600VA / 230V AC |
| Charger Output | 40A |
| AC Transfer Switch | 16A |
| AC Output Voltage | 230V AC |
| Output Waveform | Pure sine wave |
| Communication | VE.Bus |
| Weight | 10 kg |
| GTIN | 8719076044987 |
Applications
- Off-grid cabins and remote properties with 24V battery banks.
- Marine vessels requiring shore power passthrough and battery charging.
- Motorhomes and large campervans with 24V electrical systems.
- Backup power systems for critical loads in commercial or residential settings.
- Parallel installations where multiple MultiPlus units are combined for higher output capacity.
What Is Included
- 1 x Victron MultiPlus 24/1600/40-16 230V VE.Bus inverter charger unit.
Installation Notes
Installation should be carried out by a qualified electrician or accredited installer. The MultiPlus must be connected to a correctly rated 24V battery bank with appropriate DC cabling and fusing. AC wiring must comply with BS 7671 (IET Wiring Regulations). For any grid-connected or export application, G98 or G99 compliance and DNO notification requirements apply. Configuration via VE.Configure software is recommended to set charge voltages and thresholds appropriate to the battery chemistry in use.
Return Policy
xWe offer a 14-day, no-quibble returns or replacement policy because we want you to be totally satisfied with your purchase.
If you are unhappy in any way with your purchase, you can return it for a refund or a replacement, as long as you return it in the same condition as it arrived (original/undamaged packaging and product) and within 30 days of receiving it. We will pay for your return postage on a faulty item as long as you send it using our UPS account (we will provide you with a return label)
Please keep in mind the following:
- Items returned within 14 days but not in their original and undamaged packaging will also incur a -15% charge per package.
- If you return an item that doesn't adhere to our returns procedure or doesn't include a returns form, you may be liable for a €10 administration fee
- Individual items from a bundle can't be returned, refunded or exchanged. If you want a refund/credit/exchange for a bundle, all items must be returned to us.
Before you return your item, please make sure that:
- You follow our returns process (outlined below)
- The goods and packaging are undamaged
IMPORTANT: We need to be able to identify an item with your order. We can only do this if you follow our returns process. Please do not send us items back that do not follow this process as they cannot be identified properly and will not be replaced or refunded.
What delivery method do I need to use when returning an item?
You must send the goods back to us by a tracked/recorded delivery service. Refunds on faulty items returned are reimbursed within 5 working days.
Can I return just one item from multiple purchases?
Yes. Once you start the returns process you will go to a page that will allow you to choose which items you want to be replaced or refunded.
Returning faulty goods
If your item is faulty, you need to follow the returns policy, where you will be able to state that it’s faulty. The product will then arrive at our warehouse for testing.
If your purchase is not within 14 days
You can still exchange your item for a different product or for credit to use on the Voltacon Solar website (-15% from the credit amount).
Returns outside of the 14-day period do not qualify for the free returns policy.
Returning an item within the warranty
If you have a warranty and want to return a faulty item, you just need to follow our standard returns process. When we receive your item, we will then check that it’s within warranty and for any faults before arranging a replacement.