Description
xElite Solar 625W N-Type Bifacial Dual Glass Solar Panels - Pallet of 6
This listing is for 6 x Elite Solar ET-NR66TBH625GL 625W N-Type bifacial dual glass solar panels, supplied packed and strapped on a pallet. The total combined output is 3750W, or 3.75kW, making this pallet ideal for commercial, agricultural, industrial and ground-mounted solar PV projects.
Each Elite Solar 625W panel is built with high-efficiency N-Type mono-crystalline bifacial cells, delivering 23.1% module efficiency and excellent long-term performance. The dual glass construction improves durability, weather resistance and protection against environmental stress, making the panels suitable for demanding installations where reliability is essential.
Bifacial Solar Technology and Albedo Gain
Unlike standard solar panels, bifacial solar panels are designed to generate electricity from both the front and the rear side of the module. The front side captures direct sunlight, while the rear side captures reflected light from the surface below the panel. This reflected light is known as the albedo effect.
The albedo factor depends on how much light the ground or mounting surface can reflect back onto the rear side of the solar panel. Dark surfaces such as black felt, soil or tarmac reflect very little light, so the rear-side gain will be lower. Light-coloured and reflective surfaces such as white gravel, white membrane, painted concrete, light-coloured ballast, reflective sheets or pale roof surfaces can significantly improve the rear-side generation.
When installed correctly at around 20° to 35° with good clearance behind the panel and a reflective surface underneath, the rear side of the panel can contribute additional output. Under suitable conditions, the rear-side gain can be up to approximately 115W per panel, although this depends on the installation angle, surface reflectivity, height from the ground, shading, spacing between rows and overall site conditions.
To benefit properly from bifacial technology, the back of the panel must not be blocked. The panel should not be installed flat against a dark or solid surface, as this will prevent reflected light from reaching the rear cells. Bifacial panels perform best on ground-mounted frames, flat roof mounting systems, carports, agricultural structures and open-frame installations where light can reach both sides of the module.
Key Features
- Supplied as a pallet of 6 solar panels
- 625W peak power output per panel under STC conditions
- Total combined output of 3750W, or 3.75kW
- N-Type mono-crystalline bifacial solar cell technology
- Generates power from both front and rear side of the panel
- 23.1% high module efficiency
- Dual glass construction with 2.0mm front glass and 2.0mm rear glass
- Bifacial gain of 5% to 25%, depending on installation conditions
- Rear-side contribution can reach up to approximately 115W per panel in suitable reflective installations
- SMBB technology for improved light capture and current collection
- Excellent anti-PID performance
- Power tolerance of 0 to +3%
- IP68 junction box with 3 bypass diodes
- Maximum system voltage of 1500VDC
- Operating temperature from -40°C to +85°C
- Low degradation, with first year maximum 1% and 0.40% per year from year 2
- 12-year product and workmanship warranty
- 30-year linear power output warranty
Product Overview
The Elite Solar ET-NR66TBH625GL is a high-output N-Type bifacial dual glass solar panel designed for installations where performance, reliability and long service life are important. With a 625W front-side rating and additional rear-side generation potential, this panel is a strong choice for projects where space is valuable and energy yield needs to be maximised.
N-Type cell technology offers improved efficiency, lower degradation and better long-term power retention compared with conventional solar cell technologies. This makes the panel suitable for commercial rooftops, agricultural solar systems, ground-mounted arrays, industrial buildings and large residential PV systems.
The dual glass design replaces the traditional backsheet with a second glass layer. This improves mechanical strength and helps protect the solar cells from moisture, UV exposure and environmental ageing. The result is a more robust panel with a longer operating life and stable performance across demanding outdoor conditions.
For best bifacial performance, the installation should allow reflected light to reach the rear side of the module. A raised mounting structure, correct tilt angle, good row spacing and a reflective surface underneath the panels will help increase the albedo gain. White gravel, white roof membrane, painted concrete or reflective ground covering can all improve the rear-side contribution.
Technical Specifications
| Model | Elite Solar ET-NR66TBH625GL |
| Panel Type | N-Type Bifacial Dual Glass |
| Power Output | 625W per panel |
| Quantity in This Listing | 6 panels |
| Combined Output | 3750W / 3.75kW |
| Module Efficiency | 23.1% |
| Bifacial Gain | 5% to 25%, depending on installation conditions |
| Rear-Side Gain Potential | Up to approximately 115W per panel in suitable reflective installations |
| Cell Technology | N-Type mono-crystalline bifacial |
| Glass Construction | 2.0mm front glass and 2.0mm rear glass |
| Power Tolerance | 0 to +3% |
| Junction Box | IP68 with 3 bypass diodes |
| Maximum System Voltage | 1500VDC |
| Operating Temperature | -40°C to +85°C |
| Degradation | First year max 1%, then max 0.40% per year from year 2 |
| Product Warranty | 12 years |
| Linear Power Warranty | 30 years |
Suitable Applications
- Commercial rooftop solar PV installations
- Ground-mounted solar arrays
- Agricultural and farm solar projects
- Industrial and warehouse rooftop systems
- Flat roof installations with reflective surfaces
- Solar carports and open-frame structures
- Large residential solar PV projects
- Free-standing solar panel mounting systems
How to Maximise Rear-Side Generation
- Install the panels at an angle of approximately 20° to 35° where suitable for the site
- Use a reflective surface underneath the panels, such as white gravel, white membrane, painted concrete or reflective sheet material
- Keep the rear side of the panel open and unobstructed
- Avoid mounting the panel directly against dark surfaces
- Allow enough height and air gap behind the panel for reflected light to reach the rear cells
- Avoid rear-side shading from rails, cables, ballast blocks or nearby structures where possible
- Use suitable row spacing to reduce shading between panel rows
Installation and Safety Notes
These solar panels must be installed by a qualified solar installer. Mounting structure design, cable sizing, string voltage calculations, earthing, DC protection and inverter compatibility must comply with the IET Wiring Regulations and the manufacturer’s installation instructions.
The maximum system voltage is 1500VDC. Do not exceed the maximum series fuse rating of 30A. Correct handling is required during transport and installation, as dual glass panels must be supported properly to prevent stress or damage.
What You Will Receive
- 6 x Elite Solar ET-NR66TBH625GL 625W N-Type bifacial dual glass solar panels
- Panels packed and strapped on a pallet for safe delivery
Specifications
xElite Solar 625W N-Type Bifacial Dual Glass Solar Panel Specifications
Electrical Specifications - 625W Model
| Specification | STC | NOCT |
|---|---|---|
| Module Type | ET-NR66TBH625GL | ET-NR66TBH625GL |
| Maximum Power - Pmax | 625W | 473W |
| Open Circuit Voltage - Voc | 49.30V | 46.93V |
| Short Circuit Current - Isc | 16.12A | 13.02A |
| Maximum Power Voltage - Vmp | 40.99V | 38.43V |
| Maximum Power Current - Imp | 15.25A | 12.32A |
| Module Efficiency | 23.1% | - |
Electrical Ratings and Temperature Coefficients
| Specification | Value |
|---|---|
| Power Tolerance | 0 to +3% |
| Pmax Temperature Coefficient | -0.30%/°C |
| Voc Temperature Coefficient | -0.22%/°C |
| Isc Temperature Coefficient | +0.042%/°C |
| Fire Performance | Type 29 UL |
| STC Conditions | AM1.5, 1000W/m², 25°C |
| NOCT Conditions | AM1.5, 800W/m², 20°C, 1m/s |
| Test Uncertainty for Pmax | ±3% |
Mechanical Specifications
| Specification | Value |
|---|---|
| External Dimensions | 2382 x 1134 x 30mm / 93.78 x 44.65 x 1.18 inch |
| Weight | 33kg / 72.75lbs |
| Solar Cells | N-Type mono-crystalline, 132 cells |
| Front Glass / Back Glass | 2.0mm / 2.0mm, 0.08 inch |
| Frame | Anodized aluminium alloy |
| Junction Box | IP68, 3 diodes |
| Cable Length Including Connector | 4.0mm², 12AWG, portrait 200mm positive / 400mm negative, or customised |
| Connector | CD2 / MC4 compatible |
| Power Bifaciality | 80% ±10% |
Application Conditions
| Specification | Value |
|---|---|
| Maximum System Voltage | 1500VDC |
| Maximum Series Fuse Rating | 30A |
| Operating Temperature | -40°C to +85°C |
| Nominal Operating Cell Temperature | 45 ±2°C |
| Maximum Mechanical Load | 5400Pa / 2400Pa |
Warranty and Performance
| Warranty / Performance Item | Value |
|---|---|
| Product Material and Workmanship Warranty | 12 years |
| Linear Power Output Warranty | 30 years |
| First Year Degradation | ≤1% |
| Annual Degradation From Year 2 to Year 30 | ≤0.40% per year |
Technology Features
| Feature | Description |
|---|---|
| SMBB Technology | Uses advanced technology to improve light trapping and current collection, helping to enhance module power output and reliability. |
| PID Resistance | Designed for excellent anti-PID performance through optimised mass production processes and material control. |
| Increased Power Output | Module power can increase approximately 5% to 25% from bifacial gain, depending on installation conditions. |
Manufacturer Rear Side Power Gain Reference
The data sheet rear side power gain table is printed for ET-NR66TBH620L. It is included below as a manufacturer reference only.
| Power Gain | 10% | 15% | 20% | 25% |
|---|---|---|---|---|
| Maximum Power - Pmax | 682W | 713W | 744W | 755W |
| Open Circuit Voltage - Voc | 49.10V | 49.10V | 49.10V | 49.10V |
| Short Circuit Current - Isc | 17.84A | 18.66A | 19.47A | 20.28A |
| Maximum Power Voltage - Vmp | 40.82V | 40.82V | 40.82V | 40.82V |
| Maximum Power Current - Imp | 16.71A | 17.47A | 18.23A | 18.99A |
Packaging Information
| Specification | Value |
|---|---|
| Container | 40ft HQ |
| Pieces Per Pallet | 36 panels |
| Packing Size | 2400 x 1130 x 1264mm / 94.49 x 44.49 x 49.76 inch |
| Packing Weight | 1231kg / 2713.89lbs |
| Pieces Per Container |
Return Policy
xWe offer a 14-day, no-quibble returns or replacement policy because we want you to be totally satisfied with your purchase.
If you are unhappy in any way with your purchase, you can return it for a refund or a replacement, as long as you return it in the same condition as it arrived (original/undamaged packaging and product) and within 30 days of receiving it. We will pay for your return postage on a faulty item as long as you send it using Royal Mail 2nd class recorded delivery (for EU or International Shipments, you have to use our UPS account, we will provide you with a return label)
Please keep in mind the following:
- Non-faulty items returned after 14 days and/or not in their original, undamaged packaging can only be exchanged for store credit - 15% off the items returned.
- Items returned within 14 days but not in their original and undamaged packaging will also incur a -15% charge per package.
- If you return an item that doesn't adhere to our returns procedure or doesn't include a returns form, you may be liable for a £10 administration fee
- Individual items from a bundle can't be returned, refunded or exchanged. If you want a refund/credit/exchange for a bundle, all items must be returned to us.
Before you return your item, please make sure that:
- You follow our returns process (outlined below)
- The goods and packaging are undamaged
IMPORTANT: We need to be able to identify an item with your order. We can only do this if you follow our returns process. Please do not send us items back that do not follow this process as they cannot be identified properly and will not be replaced or refunded.
What delivery method do I need to use when returning an item?
You must send the goods back to us via Royal Mail 2nd class recorded delivery. Refunds on faulty items returned are reimbursed within 5 working days.
Can I return just one item from multiple purchases?
Yes. Once you start the returns process you will go to a page that will allow you to choose which items you want to be replaced or refunded.
Returning faulty goods
If your item is faulty, you need to follow the returns policy, where you will be able to state that it’s faulty. The product will then arrive at our warehouse for testing.
If your purchase is not within 14 days
You can still exchange your item for a different product or for credit to use on the Voltacon Solar or Ledison-led-lights.co.uk websites (-15% from the credit amount).
Returns outside of the 14-day period do not qualify for the free returns policy.
Returning an item within the warranty
If you have a warranty and want to return a faulty item, you just need to follow our standard returns process. When we receive your item, we will then check that it’s within warranty and for any faults before arranging a replacement.