Description
xVictron Inverter 24/1600 230V VE.Direct IEC
The Victron Inverter 24/1600 converts a 24 V battery supply into 230 V 50 Hz AC for off-grid and mobile systems. It delivers 1,450 W continuous at 25°C and supplies loads through an IEC-320 outlet. It suits installers fitting out vans, boats, cabins and backup systems that run on a 24 V battery bank.
Key Features
- Continuous output of 1,450 W at 25°C and 1,300 W at 40°C, with a peak rating of 2,100 W for motor and inrush loads.
- ECO mode cuts zero load consumption from 14 W to 2 W, with an adjustable stop/start power setting and a 2.5 s retry interval.
- Dynamic low DC shutdown, with a fixed low shutdown level of 18.6 V and low restart/alarm at 21.8 V.
- VE.Direct communication port for configuration and monitoring. The unit is fully programmable.
- Two pole screw terminal for remote on/off control.
- Rated for operation from -40°C to +65°C and up to 95% humidity.
- Protection against output short circuit, overload, high and low battery voltage, over temperature and excessive DC ripple.
- Approved to automotive directive ECE R10-4 for vehicle installations.
Product Overview
The inverter accepts a DC input between 18.4 V and 34 V, which covers the normal working range of a 24 V lead acid or lithium battery bank. Maximum efficiency is 91%. Output is rated at 230 V 50 Hz, matching standard UK and EU appliances.
Zero load draw matters in off-grid systems where the inverter stays on around the clock. At 14 W, an idle inverter uses over 330 Wh per day. In ECO mode this drops to 2 W: the inverter switches off its output and checks for a load every 2.5 seconds, restarting when demand exceeds the adjustable threshold. Dynamic low DC shutdown takes account of load, so a heavy draw that briefly pulls battery voltage down is less likely to cause a nuisance trip, while light loads are cut before the battery is over-discharged.
The VE.Direct port lets installers set shutdown voltages, ECO mode thresholds and other parameters, and connect the inverter to Victron monitoring equipment. Continuous output derates as ambient temperature rises, so allow for the 40°C rating in engine bays, lockers and other warm enclosures.
Technical Specifications
| Parameter | Value |
| SKU | PIN242161100 |
| GTIN | 8719076070924 |
| Nominal battery voltage | 24 V |
| DC input voltage range | 18.4 to 34 V |
| Continuous power at 25°C | 1,450 W |
| Continuous power at 40°C | 1,300 W |
| Peak power | 2,100 W |
| AC output voltage | 230 V |
| Frequency | 50 Hz |
| Maximum efficiency | 91% |
| Zero load power | 14 W |
| Zero load power in ECO mode | 2 W |
| ECO mode retry interval | 2.5 s |
| ECO mode stop/start power | Adjustable |
| DC low shutdown | 18.6 V |
| DC low restart and alarm | 21.8 V |
| Dynamic low DC shutdown | Yes |
| Battery charged detection | 28 V |
| Protections | Output short circuit, overload, high battery voltage, low battery voltage, over temperature, excessive DC ripple |
| Communication port | VE.Direct |
| Remote on/off | Yes, two pole screw terminal |
| Fully programmable | Yes |
| AC outlet | IEC-320 (male plug included) |
| Battery connection | Screw terminals 25 mm² (4 AWG) |
| Operating temperature | -40°C to +65°C |
| Power derating | 1.25% |
| Maximum humidity | 95% |
| Protection category | IP21 |
| Enclosure | Steel chassis and plastic cover, blue (RAL 5012) |
| Dimensions (H x W x D) | 117 x 231 x 365 mm |
| Weight | 8.9 kg |
| Safety standards | EN-IEC 60335-1, EN-IEC 62109-1 |
| EMC standards | EN 55014-1, EN 55014-2, EN-IEC 61000-6-1, EN-IEC 61000-6-2, EN-IEC 61000-6-3 |
| Automotive directive | ECE R10-4 |
Applications
- Campervans, motorhomes and service vehicles running a 24 V battery system.
- Boats and narrowboats needing 230 V AC from a 24 V house bank.
- Off-grid cabins and remote sites with a 24 V solar battery system.
- Backup supply for small 230 V loads such as lighting, communications and IT equipment.
- Commercial and utility vehicles fitted with 230 V power tools or appliances.
What Is Included
- Victron Inverter 24/1600 230V VE.Direct IEC.
- IEC-320 male plug for the AC outlet.
Installation Notes
This inverter needs a 24 V battery supply and cannot be connected to a 12 V or 48 V bank. Connect the battery with cable sized for the 25 mm² screw terminals, and fit suitable DC fusing and isolation between the battery and inverter. The enclosure is rated IP21, so mount it in a dry, ventilated space away from water spray. The output is a standalone 230 V supply and must not be connected to the grid. A qualified electrician should carry out the installation, particularly where it connects to fixed AC wiring in a vehicle, vessel or building. Use an MCS-accredited installer where the system includes solar PV.
Return Policy
xWe offer a 14-day, no-quibble returns or replacement policy because we want you to be totally satisfied with your purchase.
If you are unhappy in any way with your purchase, you can return it for a refund or a replacement, as long as you return it in the same condition as it arrived (original/undamaged packaging and product) and within 30 days of receiving it. We will pay for your return postage on a faulty item as long as you send it using our UPS account (we will provide you with a return label)
Please keep in mind the following:
- Items returned within 14 days but not in their original and undamaged packaging will also incur a -15% charge per package.
- If you return an item that doesn't adhere to our returns procedure or doesn't include a returns form, you may be liable for a €10 administration fee
- Individual items from a bundle can't be returned, refunded or exchanged. If you want a refund/credit/exchange for a bundle, all items must be returned to us.
Before you return your item, please make sure that:
- You follow our returns process (outlined below)
- The goods and packaging are undamaged
IMPORTANT: We need to be able to identify an item with your order. We can only do this if you follow our returns process. Please do not send us items back that do not follow this process as they cannot be identified properly and will not be replaced or refunded.
What delivery method do I need to use when returning an item?
You must send the goods back to us by a tracked/recorded delivery service. Refunds on faulty items returned are reimbursed within 5 working days.
Can I return just one item from multiple purchases?
Yes. Once you start the returns process you will go to a page that will allow you to choose which items you want to be replaced or refunded.
Returning faulty goods
If your item is faulty, you need to follow the returns policy, where you will be able to state that it’s faulty. The product will then arrive at our warehouse for testing.
If your purchase is not within 14 days
You can still exchange your item for a different product or for credit to use on the Voltacon Solar website (-15% from the credit amount).
Returns outside of the 14-day period do not qualify for the free returns policy.
Returning an item within the warranty
If you have a warranty and want to return a faulty item, you just need to follow our standard returns process. When we receive your item, we will then check that it’s within warranty and for any faults before arranging a replacement.