Description
xElite Solar 625W N-Type Bifacial Dual Glass Solar Panel
The Elite Solar ET-NR66TBH625GL is a 625W N-Type bifacial dual glass solar panel delivering 23.1% module efficiency and a 30-year linear power output warranty. Built for commercial, agricultural, and ground-mounted solar projects where high output and long-term reliability are essential, this panel combines advanced N-Type cell technology with durable dual-glass construction for dependable performance in demanding conditions.
For quantities of 6, 8, 10 12, or 36 panels you can visit our dedicated listing with palletised photovoltaic modules
Key Features
- 625W peak power output (STC)
- N-Type mono-crystalline bifacial cell technology
- 23.1% module efficiency
- Dual glass construction (2.0mm front and rear) for improved durability
- Bifacial gain of 5% to 25% depending on installation conditions
- Power tolerance: 0 to +3%
- IP68 junction box with 3 bypass diodes
- Maximum system voltage: 1500VDC
- Operating temperature: -40 to +85°C
- Low annual degradation: first year max 1%, subsequent years max 0.40% per year
- 12-year product and workmanship warranty
- 30-year linear power output warranty
Product Overview
N-Type bifacial technology allows energy generation from both the front and rear of the module. In suitable installation conditions such as ground-mounted arrays, light-coloured roof surfaces, or flat roof systems with reflective material, the bifacial gain can increase total energy output by 5% to 25% compared to a standard monofacial panel of the same rated power.
The dual glass construction replaces the conventional back-sheet with a second glass layer, improving resistance to environmental stress and reducing long-term degradation. Combined with the low annual power loss of 0.40% from year 2, this module retains strong output well into the second decade of service.
The ET-NR66TBH625GL uses SMBB (Super Multi Busbar) cell technology to improve light trapping and current collection, contributing to the high efficiency figure. The panel also demonstrates excellent anti-PID performance through optimised manufacturing processes.
Applications
- Commercial rooftop solar installations
- Ground-mounted utility and agricultural solar arrays
- Warehouse and industrial building rooftop PV systems
- Flat roof installations with reflective surfaces
- Large residential solar projects
Installation and Safety Notes
This panel must be installed by a qualified MCS-accredited solar installer. Mounting structure design, cable sizing, string voltage calculations, and earthing must comply with IET Wiring Regulations and the panel manufacturer's installation instructions. Maximum system voltage is 1500VDC. Do not exceed the maximum series fuse rating of 30A.
Specifications
xElite Solar 625W N-Type Bifacial Dual Glass Solar Panel Specifications
Electrical Specifications - 625W Model
| Specification | STC | NOCT |
|---|---|---|
| Module Type | ET-NR66TBH625GL | ET-NR66TBH625GL |
| Maximum Power - Pmax | 625W | 473W |
| Open Circuit Voltage - Voc | 49.30V | 46.93V |
| Short Circuit Current - Isc | 16.12A | 13.02A |
| Maximum Power Voltage - Vmp | 40.99V | 38.43V |
| Maximum Power Current - Imp | 15.25A | 12.32A |
| Module Efficiency | 23.1% | - |
Electrical Ratings and Temperature Coefficients
| Specification | Value |
|---|---|
| Power Tolerance | 0 to +3% |
| Pmax Temperature Coefficient | -0.30%/°C |
| Voc Temperature Coefficient | -0.22%/°C |
| Isc Temperature Coefficient | +0.042%/°C |
| Fire Performance | Type 29 UL |
| STC Conditions | AM1.5, 1000W/m², 25°C |
| NOCT Conditions | AM1.5, 800W/m², 20°C, 1m/s |
| Test Uncertainty for Pmax | ±3% |
Mechanical Specifications
| Specification | Value |
|---|---|
| External Dimensions | 2382 x 1134 x 30mm / 93.78 x 44.65 x 1.18 inch |
| Weight | 33kg / 72.75lbs |
| Solar Cells | N-Type mono-crystalline, 132 cells |
| Front Glass / Back Glass | 2.0mm / 2.0mm, 0.08 inch |
| Frame | Anodized aluminium alloy |
| Junction Box | IP68, 3 diodes |
| Cable Length Including Connector | 4.0mm², 12AWG, portrait 200mm positive / 400mm negative, or customised |
| Connector | CD2 / MC4 compatible |
| Power Bifaciality | 80% ±10% |
Application Conditions
| Specification | Value |
|---|---|
| Maximum System Voltage | 1500VDC |
| Maximum Series Fuse Rating | 30A |
| Operating Temperature | -40°C to +85°C |
| Nominal Operating Cell Temperature | 45 ±2°C |
| Maximum Mechanical Load | 5400Pa / 2400Pa |
Warranty and Performance
| Warranty / Performance Item | Value |
|---|---|
| Product Material and Workmanship Warranty | 12 years |
| Linear Power Output Warranty | 30 years |
| First Year Degradation | ≤1% |
| Annual Degradation From Year 2 to Year 30 | ≤0.40% per year |
Technology Features
| Feature | Description |
|---|---|
| SMBB Technology | Uses advanced technology to improve light trapping and current collection, helping to enhance module power output and reliability. |
| PID Resistance | Designed for excellent anti-PID performance through optimised mass production processes and material control. |
| Increased Power Output | Module power can increase approximately 5% to 25% from bifacial gain, depending on installation conditions. |
Manufacturer Rear Side Power Gain Reference
The data sheet rear side power gain table is printed for ET-NR66TBH620L. It is included below as a manufacturer reference only.
| Power Gain | 10% | 15% | 20% | 25% |
|---|---|---|---|---|
| Maximum Power - Pmax | 682W | 713W | 744W | 755W |
| Open Circuit Voltage - Voc | 49.10V | 49.10V | 49.10V | 49.10V |
| Short Circuit Current - Isc | 17.84A | 18.66A | 19.47A | 20.28A |
| Maximum Power Voltage - Vmp | 40.82V | 40.82V | 40.82V | 40.82V |
| Maximum Power Current - Imp | 16.71A | 17.47A | 18.23A | 18.99A |
Packaging Information
| Specification | Value |
|---|---|
| Container | 40ft HQ |
| Pieces Per Pallet | 36 panels |
| Packing Size | 2400 x 1130 x 1264mm / 94.49 x 44.49 x 49.76 inch |
| Packing Weight | 1231kg / 2713.89lbs |
| Pieces Per Container |
Return Policy
xWe offer a 14-day, no-quibble returns or replacement policy because we want you to be totally satisfied with your purchase.
If you are unhappy in any way with your purchase, you can return it for a refund or a replacement, as long as you return it in the same condition as it arrived (original/undamaged packaging and product) and within 30 days of receiving it. We will pay for your return postage on a faulty item as long as you send it using Royal Mail 2nd class recorded delivery (for EU or International Shipments, you have to use our UPS account, we will provide you with a return label)
Please keep in mind the following:
- Non-faulty items returned after 14 days and/or not in their original, undamaged packaging can only be exchanged for store credit - 15% off the items returned.
- Items returned within 14 days but not in their original and undamaged packaging will also incur a -15% charge per package.
- If you return an item that doesn't adhere to our returns procedure or doesn't include a returns form, you may be liable for a £10 administration fee
- Individual items from a bundle can't be returned, refunded or exchanged. If you want a refund/credit/exchange for a bundle, all items must be returned to us.
Before you return your item, please make sure that:
- You follow our returns process (outlined below)
- The goods and packaging are undamaged
IMPORTANT: We need to be able to identify an item with your order. We can only do this if you follow our returns process. Please do not send us items back that do not follow this process as they cannot be identified properly and will not be replaced or refunded.
What delivery method do I need to use when returning an item?
You must send the goods back to us via Royal Mail 2nd class recorded delivery. Refunds on faulty items returned are reimbursed within 5 working days.
Can I return just one item from multiple purchases?
Yes. Once you start the returns process you will go to a page that will allow you to choose which items you want to be replaced or refunded.
Returning faulty goods
If your item is faulty, you need to follow the returns policy, where you will be able to state that it’s faulty. The product will then arrive at our warehouse for testing.
If your purchase is not within 14 days
You can still exchange your item for a different product or for credit to use on the Voltacon Solar or Ledison-led-lights.co.uk websites (-15% from the credit amount).
Returns outside of the 14-day period do not qualify for the free returns policy.
Returning an item within the warranty
If you have a warranty and want to return a faulty item, you just need to follow our standard returns process. When we receive your item, we will then check that it’s within warranty and for any faults before arranging a replacement.