Description
xVictron Inverter 48/1600 230V VE.Direct IEC
The Victron Inverter 48/1600 converts a 48 V battery supply into 230 V, 50 Hz AC. It delivers 1,450 W continuous at 25 °C and 2,100 W peak, with an IEC-320 output socket. It is aimed at installers building 48 V battery systems for cabins, vehicles, marine and remote sites that need a modest 230 V supply.
Key Features
- Continuous output of 1,450 W at 25 °C and 1,300 W at 40 °C, with a 2,100 W peak rating for motor and inrush loads.
- ECO mode cuts zero load consumption from 15 W to 3 W, with a 2.5 second load search interval and an adjustable stop/start power setting.
- Dynamic low DC shutdown is supported, alongside a fixed low shutdown at 37.2 V and a low restart and alarm level of 43.6 V.
- VE.Direct communication port for configuration and monitoring, and the unit is fully programmable.
- Two pole remote on/off screw terminal for connection to an external switch or battery management control.
- Protection against output short circuit, overload, high and low battery voltage, over temperature and excessive DC ripple.
- Rated operating temperature range of -40 °C to 65 °C, with humidity up to 95 %.
- IEC-320 AC outlet with a male plug included for making up the output connection.
Product Overview
The inverter accepts a DC input from 36.8 V to 62 V, which covers the normal working window of a 48 V battery bank. Continuous output falls as ambient temperature rises: 1,450 W at 25 °C drops to 1,300 W at 40 °C. Size the inverter against the warmest conditions the installation will see, not the headline figure. Maximum efficiency is 92 %.
No-load draw matters on small battery systems. At 15 W in normal mode the inverter would use around 360 Wh a day doing nothing. In ECO mode it drops to 3 W and checks for a load every 2.5 seconds, switching on fully once demand passes the set threshold. The threshold can be adjusted to suit appliances with low standby draw.
The low voltage settings protect the battery from deep discharge. The inverter shuts down at 37.2 V and gives an alarm and restart point at 43.6 V. Battery charged detection is set at 56 V. Through the VE.Direct port these settings can be changed to match the battery chemistry and the manufacturer's limits. The remote on/off terminal lets a BMS or switch disable the output without breaking the DC supply.
Technical Specifications
| Parameter | Value |
| SKU | PIN482161100 |
| GTIN | 8719076070986 |
| Nominal battery voltage | 48 V |
| DC input voltage range | 36.8 V to 62 V |
| Continuous power at 25 °C | 1,450 W |
| Continuous power at 40 °C | 1,300 W |
| Peak power | 2,100 W |
| AC output voltage | 230 V |
| Frequency | 50 Hz |
| Maximum efficiency | 92 % |
| Zero load power | 15 W |
| Zero load power (ECO mode) | 3 W |
| ECO mode retry interval | 2.5 s |
| ECO mode stop/start power setting | Adjustable |
| DC low shutdown | 37.2 V |
| DC low restart and alarm | 43.6 V |
| Dynamic low DC shutdown | Yes |
| Battery charged detection voltage | 56 V |
| Remote on/off terminal | Yes, two pole screw terminal |
| Communication port | VE.Direct |
| Fully programmable | Yes |
| Protections | Output short circuit, overload, high battery voltage, low battery voltage, over temperature, excessive DC ripple |
| Operating temperature range | -40 °C to 65 °C |
| Maximum humidity | 95 % |
| Power derating | 1.25 % |
| AC outlet socket | IEC-320 (male plug included) |
| Battery connection | Screw terminals 25 mm² (4 AWG) |
| Protection category | IP21 |
| Enclosure | Steel chassis and plastic cover, blue (RAL 5012) |
| Dimensions (H x W x D) | 117 x 231 x 365 mm |
| Weight | 8.9 kg |
| Safety standards | EN-IEC 60335-1, EN-IEC 62109-1 |
| EMC standards | EN 55014-1, EN 55014-2, EN-IEC 61000-6-1, EN-IEC 61000-6-2, EN-IEC 61000-6-3 |
| Automotive directive | ECE R10-4 |
Applications
- 230 V supply from a 48 V battery bank in off-grid cabins, workshops and outbuildings.
- Vehicle and motorhome installations with a 48 V house battery. The unit carries ECE R10-4 automotive approval.
- Marine systems running small 230 V loads such as chargers, lighting and galley appliances from a 48 V bank.
- Remote monitoring, telecoms and security sites where low standby draw in ECO mode extends battery autonomy.
- Unheated or outdoor enclosures, within the -40 °C to 65 °C operating range and the IP21 rating.
What Is Included
- Victron Inverter 48/1600 230V VE.Direct IEC (PIN482161100).
- IEC-320 male plug for the AC output connection.
Installation Notes
This inverter needs a 48 V nominal battery system and must not be connected to 12 V or 24 V banks. The battery terminals take cable up to 25 mm² (4 AWG). Size DC cabling and fusing for the continuous and peak current at 48 V, and set the low voltage thresholds through VE.Direct to suit the battery chemistry in use. The enclosure is rated IP21, so mount it indoors or in a dry, ventilated space. Allow for the reduced output at higher ambient temperatures. Battery and 230 V AC connections should be made by a qualified electrician. Any work tied into solar PV or a property's fixed wiring should be carried out by a qualified or MCS-accredited installer.
Return Policy
xWe offer a 14-day, no-quibble returns or replacement policy because we want you to be totally satisfied with your purchase.
If you are unhappy in any way with your purchase, you can return it for a refund or a replacement, as long as you return it in the same condition as it arrived (original/undamaged packaging and product) and within 30 days of receiving it. We will pay for your return postage on a faulty item as long as you send it using our UPS account (we will provide you with a return label)
Please keep in mind the following:
- Items returned within 14 days but not in their original and undamaged packaging will also incur a -15% charge per package.
- If you return an item that doesn't adhere to our returns procedure or doesn't include a returns form, you may be liable for a €10 administration fee
- Individual items from a bundle can't be returned, refunded or exchanged. If you want a refund/credit/exchange for a bundle, all items must be returned to us.
Before you return your item, please make sure that:
- You follow our returns process (outlined below)
- The goods and packaging are undamaged
IMPORTANT: We need to be able to identify an item with your order. We can only do this if you follow our returns process. Please do not send us items back that do not follow this process as they cannot be identified properly and will not be replaced or refunded.
What delivery method do I need to use when returning an item?
You must send the goods back to us by a tracked/recorded delivery service. Refunds on faulty items returned are reimbursed within 5 working days.
Can I return just one item from multiple purchases?
Yes. Once you start the returns process you will go to a page that will allow you to choose which items you want to be replaced or refunded.
Returning faulty goods
If your item is faulty, you need to follow the returns policy, where you will be able to state that it’s faulty. The product will then arrive at our warehouse for testing.
If your purchase is not within 14 days
You can still exchange your item for a different product or for credit to use on the Voltacon Solar website (-15% from the credit amount).
Returns outside of the 14-day period do not qualify for the free returns policy.
Returning an item within the warranty
If you have a warranty and want to return a faulty item, you just need to follow our standard returns process. When we receive your item, we will then check that it’s within warranty and for any faults before arranging a replacement.