Protection Monitoring
Complete Range Of DC And AC Protection Devices
Safety is paramount in solar photovoltaic systems. We have meticulously selected reliable devices that will protect yourself, your solar inverter and all the peripheral equipment (batteries and solar panels).
PV Combiner Boxes
These boxes are loaded with DC fuses, DC isolators and cable glands. They are used to protect multiple parallel strings in solar arrays. There are standard DIN rails for mounting fuse holders or terminals.
PV String Fuses And Holders
GAVE Electro DIN rail mounting fuse holders are made for Photovoltaic & DC applications. They are rated at 1000V and come in 12A, 15A and 20A. Terminals accept up to 10mm2 flexible cable or 16mm2 solid wire.
DC Isolators. Kraus & Naimer
The DC isolator is the safest means of manual isolation between PV arrays and inverters. It is suitable for all grid-tied and off-grid installations. The DC switch is installed close to the inverter. As a rule of thumb, the switch voltage rating is calculated if you multiply the 1.15 x Voc open circuit voltage of the string. The current rating is 1.25 x Isc the string Isc short circuit.
AC Isolator. Kraus & Naimer
All solar installations must have one of these switches. They provide the perfect means of manually isolating the solar inverter from the AC supply (Grid Voltage) or your AC loads if we are referring to an off-grid system. The right position for the AC isolator is next to the consumer unit.
- 10
- 15
- 20
- 25
- 30
- 50
- Featured
- Most relevant
- Best selling
- Alphabetically, A-Z
- Alphabetically, Z-A
- Price, low to high
- Price, high to low
- Date, old to new
- Date, new to old
Sort by:
- Featured
- Most relevant
- Best selling
- Alphabetically, A-Z
- Alphabetically, Z-A
- Price, low to high
- Price, high to low
- Date, old to new
- Date, new to old
-
Vendor:ABB
ABB Surge Protection - OVR T2 PV-40-1500 P QS
Surge protection device for power supply systems Type 2 PV SPDs have characteristics of type 2, they are capable of discharging indirect lightning strikes causing induced or conducted overvoltages generally from earth to the panel they have a low residual voltage (Up), which is compatible...- 250,00 lei
- 250,00 lei
- Unit price
- / per
-
Vendor:Socomec
Sirco MV PV AR 3+3p 40A 600Vdc
Load break switches for photovoltaic applications. 3 Poles + 3 Poles at 40A current. Function SIRCO MC PV are DC non-fusible disconnect switches. They make and break under load conditions and provide optimum safe isolation for any PV circuit. ADVANTAGES COMPACT Thanks to its...- 369,00 lei
- 369,00 lei
- Unit price
- / per
-
Vendor:Voltacon
Volta-Switch AC Isolator For Solar Inverters 25A/32A Single-phase
Solar PV AC-isolator that is compliant with IEC60947-3 and AS 60947:3:2018. The switch is encapsulated in the IP66 enclosure and provides safe isolation for voltages up to 1000V at 32A. Suitable for commercial and residential photovoltaic systems The V-Switch is a configurable AC isolator...- From 182,00 lei
- From 182,00 lei
- Unit price
- / per
-
Vendor:Chint
Consumer Units 1kW To 5kW Single Phase Solar Inverters. RCD / MCB Protection
The metallic enclosures are pre-assembled and installed with 30mA 63A RCD and an MCB. Cable glands included. Range for 1kW, 1.5kW 3kW, 5kW off-grid solar inverters. Every off-grid and grid-tie solar inverter that feeds energy to a commercial or residential building should be protected...- From 216,00 lei
- From 216,00 lei
- Unit price
- / per
-
Vendor:Kraus & Naimer
Changeover Switch With Centre Off - 2 Pole
20A Changeover Switch with Centre Off, Kraus & Naimer Suitable for Single Phase Systems where a dual power supply is required. This device will switch from a renewable energy source back to the grid and vice-versa. It is a manual transfer switch for Gen-Sets and other...- 418,00 lei
- 418,00 lei
- Unit price
- / per
-
Vendor:Kraus & Naimer
DC Switch Disconnectors - Single String - Kraus & Naimer
DC Switch Disconnectors - Single String An IP65 photovoltaic DC switch in the enclosure. It is made of robust, high-quality plastic for optimum isolation from DC voltage. This device is suitable from 250V up to 1000Vdc. The current (AMP) rating varies from 25A to...- From 325,00 lei
- From 325,00 lei
- Unit price
- / per
-
Vendor:Voltacon
Solar PV DC Breaker Up To 500V. 2-pole and Battery Disconnector
MCB with high voltage breaking up to 500V and 120A and 250A. It features overload and short circuit protection. In-line breaker for high current batteries and solar PV strings. The ideal and safe option to protect photovoltaic equipment with high current and voltage. The...- From 781,00 lei
- From 781,00 lei
- Unit price
- / per
-
Vendor:Voltacon
Single Phase 5kW AC Protection Enclosure For Hybrid And Off-grid Inverters
5kW single-phase enclosure that protects solar inverters and isolates the consumer loads from the Solar-PV installation 5kW three-phase enclosure that protects solar inverters and isolates the consumer loads from the Solar-PV installation. The surge protection is essential to absorb lightning and voltage fluctuations from the...- 600,00 lei
- 600,00 lei
- Unit price
- / per
-
Vendor:Voltacon
Parallel Kit For 4kVA-5kVA Inverters 48V
Optional External Parallel Accessories Kit for Conversol & Axpert KS/MKS 4K/5K, Axpert Plus Duo/Tri 5K, lnfiniSolar V ( P/N: 31-010245-00G ) The kit will enable the installers to set up large single phase and three-phase systems. Your off-grid solar kit can now be extended...- 325,00 lei
- 325,00 lei
- Unit price
- / per
-
Vendor:Victron Energy
Temperature Sensor for BMV-702/712 - ASS000100000
Temperature sensor from Victron Energy for use with BMV-702, BMV-712 and SmartShunt Battery Monitors, plus the VE.Bus Smart Dongle. These Victron products can use temperature measurements to adjust the charging voltage and optimise battery charging. Note: Cannot be used with the BMV-700 Battery Monitor as...- 172,00 lei
- 172,00 lei
- Unit price
- / per
-
Vendor:Voltacon
Web Box - Modbus - Remote Monitoring - Hybrid Inverters
Monitor your hybrid on-grid solar inverters, over the internet using a router and ethernet cable. Suitable for Infinisolar and Voltasol Webox with Modbus Connectivity • Embedded with web server• Monitor and operate up to 247 modbus devices• Ideal monitoring solution for medium-sized solar farm•...- 406,00 lei
- 406,00 lei
- Unit price
- / per
-
Vendor:Mastervolt
Masterhunt 500A Shunt Resistor With Master Bus Interface
Monitoring accurate data from any battery requires the use of a shunt resistor. Mastershunt 500 provides high level of accuracy and control The heart of any off-grid system or battery-fed motor board or caravan. It is a vital part for monitoring the status of...- 2.048,00 lei
- 2.048,00 lei
- Unit price
- / per
-
Vendor:Victron Energy
Victron Battery Monitor BMV-712 Smart - BAM030712000
The high-tech Smart BMV712 battery monitor comes with Bluetooth built-in and is ready for your IoT (Internet of Things) project. Wireless communication between products will simplify your system installation, enhance performance and will allow you to monitor your system at a glance. Bluetooth insideWith...- 689,00 lei
- 689,00 lei
- Unit price
- / per
-
Vendor:Victron Energy
SmartSolar Pluggable Display - SCC900650010
The SmartSolar Control Display is a pluggable LCD display for the SmartSolar Charge Controllers. Simply remove the rubber seal that protects the plug on the front of the controller and plug-in the display.- 269,00 lei
- 269,00 lei
- Unit price
- / per
-
Vendor:Victron Energy
Victron Cerbo GX - BPP900450100
Cerbo GX. Panels and system monitoring. This all-new communication centre allows you to always have perfect control over your system from wherever you are and maximises its performance. Simply connect through Victron Remote Management (VRM) portal, or access directly, using the separate GX Touch 50, a...- 1.094,00 lei
- 1.094,00 lei
- Unit price
- / per
-
Vendor:Victron Energy
Interface MK3-USB (VE.Bus to USB) - ASS030140000
The MK3-USB allows the following products to connect to a computer for configuration and firmware updates: Multi, MultiGrid, MultiPlus, MultiPlus-II, Quattro, Inverter/Charger settings in ECOmulti, EasySolar, EasyPlus, and Inverters with a VE.Bus communication port.- 431,00 lei
- 431,00 lei
- Unit price
- / per
-
Vendor:Victron Energy
Current Transformer 100A:50mA for MultiPlus-II (1m) - CTR110000500
Current Transformer 100A:50mA for MultiPlus-II / MultiGrid-II to implement PowerControl and PowerAssist and to optimize self-consumption with external current sensing. See the MultiPlus-II datasheet for more details.- 200,00 lei
187,00 lei- 200,00 lei
- Unit price
- / per
-
Vendor:Victron Energy
Victron Venus GX - BPP900400100
The Venus GX is the communication-centre of your installation. Venus allows you to talk to all components in your system and ensure they are working in harmony. Monitoring of live data, and changing settings is performed by using your smartphone (or other device) via...- 2.029,00 lei
- 2.029,00 lei
- Unit price
- / per
-
Vendor:Victron Energy
Current Transformer 100A:50mA for MultiPlus-II (5m) - CTR110000550
Current Transformer 100A:50mA for MultiPlus-II / MultiGrid-II to implement PowerControl and PowerAssist and to optimize self-consumption with external current sensing. See the MultiPlus-II datasheet for more details.- 216,00 lei
- 216,00 lei
- Unit price
- / per
-
Vendor:Victron Energy
Current Transformer 100A:50mA for MultiPlus-II (20m) - CTR110002050
Current Transformer 100A:50mA for MultiPlus-II / MultiGrid-II to implement PowerControl and PowerAssist and to optimize self-consumption with external current sensing. See the MultiPlus-II datasheet for more details.- 406,00 lei
- 406,00 lei
- Unit price
- / per