Description
xVictron SmartSolar MPPT 250/100-Tr VE.Can Solar Charge Controller
The Victron SmartSolar MPPT 250/100-Tr VE.Can is a high-capacity solar charge controller designed for large off-grid, marine and commercial installations. It accepts a maximum PV open-circuit voltage of 250V and delivers up to 100A of charge current, making it suitable for substantial battery banks and high-power solar arrays. Built-in Bluetooth and VE.Can connectivity allow integration into Victron's monitoring and control ecosystem without additional hardware.
Key Features
- Maximum PV input voltage of 250V open-circuit, supporting large series-connected panel strings.
- 100A maximum charge current, suitable for charging 12V, 24V, 36V and 48V battery banks.
- VE.Can port enables direct integration with Victron GX devices, Lynx systems and other CAN-bus compatible equipment.
- Built-in Bluetooth for configuration and monitoring via the VictronConnect app on iOS and Android.
- True MPPT algorithm with rapid tracking, maintaining high conversion efficiency across varying irradiance conditions.
- Screw terminal (Tr) design for straightforward, secure cable connections in fixed installations.
- Supports lithium-ion, AGM, gel, flooded and other battery chemistries with configurable charge profiles.
- Load output functionality for direct connection of DC loads with programmable control options.
Product Overview
The 250/100 rating means this controller can handle PV arrays with an open-circuit voltage up to 250V, which allows longer panel strings in series before parallel combiners are needed. At 100A output, it can deliver up to 1.2kW into a 12V bank, 2.4kW into 24V, or 4.8kW into a 48V system. For most professional installations, a 48V battery bank paired with this controller is the practical choice, as it maximises the usable power from the array while keeping cable losses manageable.
The VE.Can interface is the key differentiator for system integrators. It allows the controller to communicate directly with Victron GX devices (Cerbo GX, Venus GX and others), enabling full remote monitoring, data logging and system-level control via the VRM portal. Multiple VE.Can devices can be networked together on the same bus, which is particularly useful in larger installations where several charge controllers or other Victron components operate in parallel. The Tr (screw terminal) variant suits permanent, fixed wiring in enclosures or distribution boards.
Configuration is handled through the VictronConnect app over Bluetooth, covering battery type, absorption and float voltages, temperature compensation, load output behaviour and more. No additional interface cable is required for initial setup. For ongoing monitoring in a managed system, the VE.Can connection to a GX device provides continuous data without relying on a mobile device being present.
Technical Specifications
| Parameter | Value |
| SKU | SCC125110412 |
| Max PV open-circuit voltage | 250V |
| Max charge current | 100A |
| Compatible battery voltages | 12V, 24V, 36V, 48V |
| Communication interfaces | VE.Can, Bluetooth (built-in) |
| Terminal type | Screw terminals (Tr) |
| Weight | 4.5 kg |
| GTIN | 8719076055662 |
Applications
- Large off-grid solar systems with 48V battery banks requiring high charge current.
- Marine and yacht installations where VE.Can network integration with other Victron equipment is required.
- Commercial and agricultural off-grid sites with substantial PV arrays and managed energy systems.
- Motorhome and vehicle conversions using Victron GX-based monitoring and control.
- Parallel multi-controller installations networked via VE.Can to a central GX device.
What Is Included
- Victron SmartSolar MPPT 250/100-Tr VE.Can charge controller
Installation Notes
This controller operates at PV voltages up to 250V DC, which is a hazardous voltage level. Installation must be carried out by a qualified electrician or accredited solar installer. Ensure PV string voltage does not exceed 250V under any temperature conditions, including cold-weather open-circuit scenarios. Battery and PV cabling must be appropriately rated for the currents involved. Where this controller forms part of a grid-connected or hybrid system, relevant G98 or G99 notification requirements may apply depending on the overall system configuration. Consult the Victron installation manual and comply with all applicable local wiring regulations.
Specifications
x
| Model | SmartSolar MPPT 250/100-Tr VE.Can |
| Part number | SCC125110512 |
| Battery voltage | 12 / 24 / 48 V auto select (36 V manual) |
| Rated charge current | 100 A |
| Nominal PV power (12 V) | 1450 W |
| Nominal PV power (24 V) | 2900 W |
| Nominal PV power (36 V) | 4350 W |
| Nominal PV power (48 V) | 5800 W |
| Max PV short circuit current | 70 A (max 30 A per MC4 connector) |
| Maximum PV open circuit voltage (absolute max) | 250 V (coldest conditions) |
| PV start-up and operating maximum | 245 V |
| Maximum efficiency | 99 % |
| Self consumption | Less than 35 mA at 12 V / 20 mA at 48 V |
| Charge voltage (absorption) default | 14.4 / 28.8 / 43.2 / 57.6 V (adjustable) |
| Charge voltage (float) default | 13.8 / 27.6 / 41.4 / 55.2 V (adjustable) |
| Charge voltage (equalisation) default | 16.2 / 32.4 / 48.6 / 64.8 V (adjustable) |
| Charge algorithm | Multi-stage adaptive (8 pre-programmed) or user defined |
| Temperature compensation | -16 mV / -32 mV / -64 mV per °C |
| Protection | PV reverse polarity / Output short circuit / Over temperature |
| Operating temperature | -30 to +60 °C (full rated output up to 40 °C) |
| Humidity | 95 %, non-condensing |
| Maximum altitude | 5000 m (full rated output up to 2000 m) |
| Environmental condition | Indoor, unconditioned |
| Pollution degree | PD3 |
| Data communication | VE.Can, VE.Direct and Bluetooth |
| Remote on/off | Yes (2 pole connector) |
| Programmable relay | DPST. AC: 240 VAC / 4 A. DC: 4 A up to 35 VDC, 1 A up to 60 VDC |
| Parallel operation | Yes, synchronised with VE.Can (max 25 units) or Bluetooth (max 10 units) |
| Enclosure colour | Blue (RAL 5012) |
| PV terminals (Tr models) | 35 mm² / AWG2 |
| Battery terminals | 35 mm² / AWG2 |
| Protection category | IP43 (electronic components), IP22 (connection area) |
| Weight | 4.5 kg |
| Dimensions (h x w x d) Tr model | 216 x 295 x 103 mm |
| Safety standards | EN/IEC 62109-1, UL 1741, CSA C22.2 |
| Stored trends | Battery voltage, current, temperature, load output current, PV voltage, PV current |
| Days of trends stored | 46 |
Notes: If more PV power is connected, the controller will limit input power. PV voltage must exceed Vbat + 5 V to start, thereafter minimum PV voltage is Vbat + 1 V. A PV array with a higher short circuit current may damage the controller.
Return Policy
xWe offer a 14-day, no-quibble returns or replacement policy because we want you to be totally satisfied with your purchase.
If you are unhappy in any way with your purchase, you can return it for a refund or a replacement, as long as you return it in the same condition as it arrived (original/undamaged packaging and product) and within 30 days of receiving it. We will pay for your return postage on a faulty item as long as you send it using Royal Mail 2nd class recorded delivery (for EU or International Shipments, you have to use our UPS account, we will provide you with a return label)
Please keep in mind the following:
- Non-faulty items returned after 14 days and/or not in their original, undamaged packaging can only be exchanged for store credit - 15% off the items returned.
- Items returned within 14 days but not in their original and undamaged packaging will also incur a -15% charge per package.
- If you return an item that doesn't adhere to our returns procedure or doesn't include a returns form, you may be liable for a £10 administration fee
- Individual items from a bundle can't be returned, refunded or exchanged. If you want a refund/credit/exchange for a bundle, all items must be returned to us.
Before you return your item, please make sure that:
- You follow our returns process (outlined below)
- The goods and packaging are undamaged
IMPORTANT: We need to be able to identify an item with your order. We can only do this if you follow our returns process. Please do not send us items back that do not follow this process as they cannot be identified properly and will not be replaced or refunded.
What delivery method do I need to use when returning an item?
You must send the goods back to us via Royal Mail 2nd class recorded delivery. Refunds on faulty items returned are reimbursed within 5 working days.
Can I return just one item from multiple purchases?
Yes. Once you start the returns process you will go to a page that will allow you to choose which items you want to be replaced or refunded.
Returning faulty goods
If your item is faulty, you need to follow the returns policy, where you will be able to state that it’s faulty. The product will then arrive at our warehouse for testing.
If your purchase is not within 14 days
You can still exchange your item for a different product or for credit to use on the Voltacon Solar or Ledison-led-lights.co.uk websites (-15% from the credit amount).
Returns outside of the 14-day period do not qualify for the free returns policy.
Returning an item within the warranty
If you have a warranty and want to return a faulty item, you just need to follow our standard returns process. When we receive your item, we will then check that it’s within warranty and for any faults before arranging a replacement.