Description
xVictron Smart BatteryProtect 48V-100A — BPR110048000
The Victron Smart BatteryProtect 48V-100A is an intelligent load disconnect device designed to protect 48V battery banks from over-discharge and over-voltage damage. It is aimed at off-grid installers, marine electricians and commercial system integrators who need reliable, programmable battery protection without relying on a full battery management system to handle load shedding.
Key Features
- Rated for 48V battery systems with a continuous load current of 100A, suitable for substantial DC load circuits.
- Bluetooth connectivity via the VictronConnect app allows wireless configuration, threshold adjustment and real-time monitoring from a smartphone or tablet.
- Programmable low-voltage disconnect and reconnect thresholds to suit different battery chemistries including lead-acid, AGM, gel and lithium.
- High-voltage (over-voltage) disconnect function protects sensitive loads from voltage spikes during charging.
- Algorithm-based reconnect logic prevents rapid cycling: the device waits for the battery to recover to the set reconnect voltage before restoring the load.
- Remote on/off input allows integration with external control signals, including Victron system components.
- No-load current draw is extremely low, making it suitable for installations where parasitic drain must be minimised.
- Compact and lightweight at 0.8 kg, with straightforward wiring for inline DC load protection.
Product Overview
The Smart BatteryProtect monitors battery voltage continuously and disconnects the load circuit when voltage drops below the programmed threshold. This prevents deep discharge events that shorten battery life, particularly in lead-acid chemistries where repeated deep cycling causes irreversible capacity loss. For lithium batteries, it provides a secondary hardware-level protection layer alongside the battery's own BMS.
The Bluetooth interface sets this unit apart from basic analogue battery protects. Using VictronConnect, an installer can configure all thresholds, select a preset algorithm for common battery types, and view the current status without needing a display panel or physical DIP switches. This is particularly useful in enclosed or hard-to-access installations such as under-floor battery compartments, marine bilge areas or cabinet-mounted off-grid systems.
The over-voltage disconnect function is relevant in systems where the charger or solar charge controller could, under fault conditions, push voltage above safe limits for connected loads. The Smart BatteryProtect will open the load circuit in response, protecting inverters, converters and other DC equipment downstream.
Technical Specifications
| Parameter | Value |
| SKU | BPR110048000 |
| Nominal Battery Voltage | 48V |
| Maximum Continuous Current | 100A |
| Connectivity | Bluetooth (VictronConnect) |
| Weight | 0.8 kg |
| GTIN | 8719076041252 |
Applications
- Off-grid solar systems where DC loads must be disconnected before the battery bank reaches damaging discharge levels.
- Marine and narrowboat installations requiring automatic load shedding to protect the house battery bank.
- Motorhome and campervan builds with 48V lithium or lead-acid leisure battery systems.
- Telecom and remote monitoring installations where battery longevity is critical and site visits are infrequent.
- Commercial cabinet systems where Bluetooth configuration removes the need for physical access during commissioning.
What Is Included
- 1 x Victron Smart BatteryProtect 48V-100A (BPR110048000)
Installation Notes
The Smart BatteryProtect must be installed in the load circuit only, between the battery and the DC loads. It is not designed to interrupt charging current and must never be placed in series with a charger output. For 48V lithium battery systems, installation should be carried out by a qualified electrician familiar with high-voltage DC systems. Ensure all cabling is rated for the full 100A continuous current and that appropriate fusing is fitted on the battery side of the unit in accordance with wiring regulations. Configuration via VictronConnect requires a compatible Bluetooth-enabled device running the VictronConnect app.
Return Policy
xWe offer a 14-day, no-quibble returns or replacement policy because we want you to be totally satisfied with your purchase.
If you are unhappy in any way with your purchase, you can return it for a refund or a replacement, as long as you return it in the same condition as it arrived (original/undamaged packaging and product) and within 30 days of receiving it. We will pay for your return postage on a faulty item as long as you send it using Royal Mail 2nd class recorded delivery (for EU or International Shipments, you have to use our UPS account, we will provide you with a return label)
Please keep in mind the following:
- Non-faulty items returned after 14 days and/or not in their original, undamaged packaging can only be exchanged for store credit - 15% off the items returned.
- Items returned within 14 days but not in their original and undamaged packaging will also incur a -15% charge per package.
- If you return an item that doesn't adhere to our returns procedure or doesn't include a returns form, you may be liable for a £10 administration fee
- Individual items from a bundle can't be returned, refunded or exchanged. If you want a refund/credit/exchange for a bundle, all items must be returned to us.
Before you return your item, please make sure that:
- You follow our returns process (outlined below)
- The goods and packaging are undamaged
IMPORTANT: We need to be able to identify an item with your order. We can only do this if you follow our returns process. Please do not send us items back that do not follow this process as they cannot be identified properly and will not be replaced or refunded.
What delivery method do I need to use when returning an item?
You must send the goods back to us via Royal Mail 2nd class recorded delivery. Refunds on faulty items returned are reimbursed within 5 working days.
Can I return just one item from multiple purchases?
Yes. Once you start the returns process you will go to a page that will allow you to choose which items you want to be replaced or refunded.
Returning faulty goods
If your item is faulty, you need to follow the returns policy, where you will be able to state that it’s faulty. The product will then arrive at our warehouse for testing.
If your purchase is not within 14 days
You can still exchange your item for a different product or for credit to use on the Voltacon Solar or Ledison-led-lights.co.uk websites (-15% from the credit amount).
Returns outside of the 14-day period do not qualify for the free returns policy.
Returning an item within the warranty
If you have a warranty and want to return a faulty item, you just need to follow our standard returns process. When we receive your item, we will then check that it’s within warranty and for any faults before arranging a replacement.