Description
xVictron Argodiode 80-2SC Battery Isolator 2 Batteries 80A
The Victron Argodiode 80-2SC is a diode-based battery isolator rated at 80A, designed to charge two separate battery banks from a single alternator or charger without allowing current to flow between them. It is suited to marine, vehicle and off-grid applications where independent battery banks must be maintained without cross-discharge.
Key Features
- 80A continuous current rating supports high-demand charging applications with two battery banks.
- Diode isolation prevents reverse current flow between battery banks, protecting each bank from discharging into the other.
- Two output circuits allow simultaneous charging of two independent batteries from a single input source.
- Compact, solid-state construction with no moving parts and no mechanical contacts to wear or corrode.
- Compatible with standard alternators and DC battery chargers as the input source.
- Weight of 0.606 kg makes it practical for installation in confined spaces such as engine bays or battery compartments.
Product Overview
The Argodiode 80-2SC uses Schottky diodes, which have a lower forward voltage drop than standard silicon diodes. This reduces the voltage loss between the input and each battery output, meaning batteries receive a charge voltage closer to the source output. In practice, this matters because a high voltage drop across a standard diode can result in undercharged batteries over time, particularly in systems where the alternator or charger output is already at the lower end of the acceptable range.
The isolator is wired with the alternator or charger connected to the single input terminal, and each battery bank connected to a separate output terminal. Current flows freely from input to output but is blocked in the reverse direction by the diodes. This means the starter battery and a leisure or auxiliary battery can both be charged simultaneously without any risk of the auxiliary bank pulling down the starter battery when the engine is off.
Diode isolators of this type require no control wiring, relays or battery management logic, which keeps installation straightforward. They are a well-established solution for dual-battery systems in vehicles, boats and static off-grid installations where simplicity and reliability are priorities.
Specifications
- SKU: ARG080202000R
- Maximum current: 80A
- Number of battery outputs: 2
- Diode type: Schottky (SC)
- Weight: 0.606 kg
- GTIN: 8719076019008
Applications
- Dual-battery systems in campervans, motorhomes and commercial vehicles where a starter battery and leisure battery must be charged independently.
- Marine installations requiring isolation between engine start and house battery banks.
- Off-grid cabins or static systems with two separate battery banks fed from a single charger or solar charge controller output.
- Agricultural and plant machinery with auxiliary battery requirements.
What Is Included
- 1 x Victron Argodiode 80-2SC battery isolator
Installation Notes
The Argodiode should be mounted in a well-ventilated location as the diodes generate heat under load. Ensure the input and output cables are correctly rated for 80A continuous current and that appropriate fusing is fitted on the input side. If the source charger or alternator has a voltage sensing line, connect it to one of the battery output terminals rather than the input terminal to compensate for the diode voltage drop. Installation should be carried out by a qualified auto-electrician or marine electrician familiar with dual-battery wiring practices.
Return Policy
xWe offer a 14-day, no-quibble returns or replacement policy because we want you to be totally satisfied with your purchase.
If you are unhappy in any way with your purchase, you can return it for a refund or a replacement, as long as you return it in the same condition as it arrived (original/undamaged packaging and product) and within 30 days of receiving it. We will pay for your return postage on a faulty item as long as you send it using Royal Mail 2nd class recorded delivery (for EU or International Shipments, you have to use our UPS account, we will provide you with a return label)
Please keep in mind the following:
- Non-faulty items returned after 14 days and/or not in their original, undamaged packaging can only be exchanged for store credit - 15% off the items returned.
- Items returned within 14 days but not in their original and undamaged packaging will also incur a -15% charge per package.
- If you return an item that doesn't adhere to our returns procedure or doesn't include a returns form, you may be liable for a £10 administration fee
- Individual items from a bundle can't be returned, refunded or exchanged. If you want a refund/credit/exchange for a bundle, all items must be returned to us.
Before you return your item, please make sure that:
- You follow our returns process (outlined below)
- The goods and packaging are undamaged
IMPORTANT: We need to be able to identify an item with your order. We can only do this if you follow our returns process. Please do not send us items back that do not follow this process as they cannot be identified properly and will not be replaced or refunded.
What delivery method do I need to use when returning an item?
You must send the goods back to us via Royal Mail 2nd class recorded delivery. Refunds on faulty items returned are reimbursed within 5 working days.
Can I return just one item from multiple purchases?
Yes. Once you start the returns process you will go to a page that will allow you to choose which items you want to be replaced or refunded.
Returning faulty goods
If your item is faulty, you need to follow the returns policy, where you will be able to state that it’s faulty. The product will then arrive at our warehouse for testing.
If your purchase is not within 14 days
You can still exchange your item for a different product or for credit to use on the Voltacon Solar or Ledison-led-lights.co.uk websites (-15% from the credit amount).
Returns outside of the 14-day period do not qualify for the free returns policy.
Returning an item within the warranty
If you have a warranty and want to return a faulty item, you just need to follow our standard returns process. When we receive your item, we will then check that it’s within warranty and for any faults before arranging a replacement.