{"title":"Victron Solar Panels and Cables","description":"\u003cp\u003eVictron solar panels are engineered for high performance in low-light conditions, making them well-suited to the UK climate where diffuse light and partial shading are common. Monocrystalline cells deliver strong output per panel with a 25-year power warranty and a robust aluminium frame. Compatible MC4 solar cables, connectors, and Y-connectors allow clean, weatherproof wiring directly to Victron MPPT charge controllers. All cabling is UV-rated and suitable for roof and ground-mount installations.\u003c\/p\u003e","products":[{"product_id":"victron-190w-mono-solar-panel-series-4c","title":"Victron Solar Panel 190W-39 cells Mono 1485x668x30mm series 4c - SPM041903903","description":"\u003ch1 style=\"color: #f87c24;\"\u003eVictron Energy 190W Monocrystalline Solar Panel – Series 4c (SPM041903903)\u003c\/h1\u003e\n\n\u003cp\u003eThe Victron Energy 190W monocrystalline solar panel is a compact, single-phase DC generation module suited to off-grid, marine, and mobile installations. At 1485 x 668 x 30mm and 10.5kg, it fits where larger panels cannot, without sacrificing the efficiency advantages of monocrystalline cell technology. It is designed for professional installers working on space-constrained or weight-sensitive systems.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e190W rated output using 39 monocrystalline silicon cells for higher efficiency per unit area compared to polycrystalline equivalents.\u003c\/li\u003e\n  \u003cli\u003eCompact 1485 x 668 x 30mm frame makes it suitable for installations where standard 60-cell panels are too large.\u003c\/li\u003e\n  \u003cli\u003eLightweight at 10.5kg, reducing structural load on roofs, vehicles, and marine superstructures.\u003c\/li\u003e\n  \u003cli\u003e30mm slim aluminium frame profile for low-profile mounting on flat or angled surfaces.\u003c\/li\u003e\n  \u003cli\u003ePart of Victron's Series 4c range, designed to integrate with Victron charge controllers and monitoring systems.\u003c\/li\u003e\n  \u003cli\u003eGTIN: 8719076070672 — genuine Victron Energy product with full supply chain traceability.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eProduct Overview\u003c\/h3\u003e\n\u003cp\u003eMonocrystalline panels produce more power per square metre than polycrystalline alternatives because the single-crystal silicon structure allows electrons to move more freely. For a 190W panel in this physical footprint, that efficiency matters: installers can achieve a useful power output from a surface area that would yield significantly less from a poly panel of the same size.\u003c\/p\u003e\n\n\u003cp\u003eThe 39-cell configuration is less common than the standard 60 or 72-cell layouts found in residential roof arrays. This makes the Victron 190W panel particularly well suited to 12V and 24V battery charging systems, where the open-circuit and maximum power point voltages align more naturally with smaller battery banks and MPPT charge controllers in the 15A to 30A range. It is a practical choice for narrowboats, campervans, off-grid cabins, and small remote power installations.\u003c\/p\u003e\n\n\u003cp\u003eSeries 4c panels are part of Victron's established panel lineup and are compatible with the full range of Victron BlueSolar and SmartSolar MPPT charge controllers. When combined with a Victron MPPT and a GX device, the panel output can be monitored in real time via the VRM portal.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable style=\"border: 2px solid #f87c24; border-collapse: collapse; width: 100%;\"\u003e\n  \u003cthead\u003e\n    \u003ctr style=\"background-color: #f87c24; color: #ffffff;\"\u003e\n      \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003e\u003cstrong\u003eValue\u003c\/strong\u003e\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003eSKU\u003c\/td\u003e\n      \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003eSPM041903903\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003eRated Power Output\u003c\/td\u003e\n      \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003e190W\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003eCell Type\u003c\/td\u003e\n      \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003eMonocrystalline silicon\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003eNumber of Cells\u003c\/td\u003e\n      \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003e39\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003eDimensions (L x W x D)\u003c\/td\u003e\n      \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003e1485 x 668 x 30mm\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003eWeight\u003c\/td\u003e\n      \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003e10.5kg\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003eSeries\u003c\/td\u003e\n      \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003e4c\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003eGTIN\u003c\/td\u003e\n      \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003e8719076070672\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eOff-grid cabin and remote power systems with 12V or 24V battery banks.\u003c\/li\u003e\n  \u003cli\u003eNarrowboat and canal boat solar charging installations.\u003c\/li\u003e\n  \u003cli\u003eCampervan, motorhome, and van conversion solar setups.\u003c\/li\u003e\n  \u003cli\u003eMarine deck installations where panel weight and footprint are constrained.\u003c\/li\u003e\n  \u003cli\u003eSmall agricultural or rural monitoring stations requiring autonomous power.\u003c\/li\u003e\n  \u003cli\u003eSupplementary charging for leisure batteries in caravans and touring setups.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eWhat Is Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1 x Victron Energy 190W monocrystalline solar panel (Series 4c)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eInstallation Notes\u003c\/h3\u003e\n\u003cp\u003eThis panel should be installed by a qualified electrician or MCS-accredited installer. Ensure the panel voltage and current ratings are compatible with your chosen charge controller before installation. For off-grid and mobile systems, verify that mounting surfaces can support the panel weight and withstand wind and vibration loads. This panel is not intended for grid-tied export without appropriate inverter and G98\/G99 compliance equipment. MC4 connectors and cabling should be rated for outdoor DC use and installed to BS 7671 wiring regulations.\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":55582447534371,"sku":"SPM041903903","price":98.25,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0863\/9001\/4243\/files\/victron-solar-panel-12v-185w-mono-series-4a-spm041851200-585533.webp?v=1789117318"},{"product_id":"victron-solarsense-750-pv-monitor","title":"Victron SolarSense 750 - SLS300175100","description":"\u003ch1 style=\"color: #f87c24;\"\u003eVictron SolarSense 750 Wireless PV Installation Monitor – SLS300175100\u003c\/h1\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eVictron SolarSense 750\u003c\/strong\u003e is a self-powered, wireless monitor that measures solar irradiance, estimated available PV power and panel temperature in real time. It connects to the \u003cstrong\u003eVictronConnect app\u003c\/strong\u003e, \u003cstrong\u003eVRM portal\u003c\/strong\u003e and \u003cstrong\u003eNode-RED\u003c\/strong\u003e, making it straightforward to integrate into manual monitoring or automated energy management routines.\u003c\/p\u003e\n\n\u003cp\u003eIt is particularly useful in off-grid and grid-limited systems where solar charging is sometimes restricted. The inverter or charge controller output tells you what the system is producing. The SolarSense 750 tells you what the array \u003cem\u003ecould\u003c\/em\u003e produce, which is a different and often more useful number.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eSelf-powered with integrated solar cell, no external wiring needed\u003c\/li\u003e\n  \u003cli\u003eWireless communication via Bluetooth Low Energy (BLE) Instant Readout\u003c\/li\u003e\n  \u003cli\u003eMeasures solar irradiance to estimate available PV power\u003c\/li\u003e\n  \u003cli\u003eMonitors panel temperature for accurate performance assessment\u003c\/li\u003e\n  \u003cli\u003eWorks with VictronConnect app for live local data access\u003c\/li\u003e\n  \u003cli\u003eIntegrates with VRM for remote monitoring and historical analysis\u003c\/li\u003e\n  \u003cli\u003eCompatible with Node-RED for automated load control\u003c\/li\u003e\n  \u003cli\u003eUseful for new installation planning, panel orientation checks and shading analysis\u003c\/li\u003e\n  \u003cli\u003eMounts directly to the PV array frame\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eProduct Overview\u003c\/h3\u003e\n\u003cp\u003eIn off-grid and grid-limited solar systems, excess PV energy is often lost once the battery is fully charged. The SolarSense 750 shows how much power is available from the array at any given moment, which allows users or automation platforms to switch additional loads on at the right time. Water heaters, pumps and other opportunity loads that would otherwise run on grid or generator later in the day can instead run on available solar.\u003c\/p\u003e\n\n\u003cp\u003eThe SolarSense 750 is also a practical commissioning and diagnostic tool. Comparing available solar radiation against actual MPPT output makes it straightforward to spot shading problems, panel degradation, incorrect orientation or system inefficiencies that would otherwise need specialist equipment to find.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eNote on Bluetooth range:\u003c\/strong\u003e Metal structures, solar panel frames and roofing materials can reduce BLE range. Position the unit accordingly during installation.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eAvailable Monitoring Data\u003c\/h3\u003e\n\u003ctable style=\"width: 100%; border-collapse: collapse; border: 2px solid #f87c24;\"\u003e\n  \u003ctbody\u003e\n    \u003ctr style=\"background-color: #f87c24; color: #ffffff;\"\u003e\n      \u003ctd style=\"padding: 10px; font-weight: bold;\"\u003eParameter\u003c\/td\u003e\n      \u003ctd style=\"padding: 10px; font-weight: bold;\"\u003eDescription\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd style=\"border: 1px solid #f87c24; padding: 10px;\"\u003e\u003cstrong\u003eIrradiance\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd style=\"border: 1px solid #f87c24; padding: 10px;\"\u003eAvailable solar radiation for PV performance estimation\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd style=\"border: 1px solid #f87c24; padding: 10px;\"\u003e\u003cstrong\u003eAvailable power\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd style=\"border: 1px solid #f87c24; padding: 10px;\"\u003eEstimated PV power available from the array\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd style=\"border: 1px solid #f87c24; padding: 10px;\"\u003e\u003cstrong\u003ePanel temperature\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd style=\"border: 1px solid #f87c24; padding: 10px;\"\u003ePanel operating temperature for performance assessment\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd style=\"border: 1px solid #f87c24; padding: 10px;\"\u003e\u003cstrong\u003eDaily min \/ max solar power\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd style=\"border: 1px solid #f87c24; padding: 10px;\"\u003eEstimated daily minimum and maximum available power in kW\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd style=\"border: 1px solid #f87c24; padding: 10px;\"\u003e\u003cstrong\u003eEstimated daily yield\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd style=\"border: 1px solid #f87c24; padding: 10px;\"\u003eEstimated solar energy yield in kWh\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eOff-grid solar systems with battery storage\u003c\/li\u003e\n  \u003cli\u003eHybrid and grid-limited solar installations\u003c\/li\u003e\n  \u003cli\u003eVictron systems using Node-RED for automated load switching\u003c\/li\u003e\n  \u003cli\u003eOpportunity load control such as water heating and pumping\u003c\/li\u003e\n  \u003cli\u003ePV array commissioning and performance checking\u003c\/li\u003e\n  \u003cli\u003ePre-sales solar site surveys and panel orientation testing\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eWhat Is Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1 x Victron SolarSense 750 monitor unit (SLS300175100)\u003c\/li\u003e\n  \u003cli\u003eMounting hardware for PV frame installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eInstallation Notes\u003c\/h3\u003e\n\u003cp\u003eMount the SolarSense 750 on or near the PV array in a position that represents the solar exposure of the panels. It requires no external power connection. Configure via the VictronConnect app over Bluetooth. Professional installation is recommended for all solar PV systems.\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":55582484103459,"sku":"SLS300175100","price":69.3,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0863\/9001\/4243\/files\/SolarSense_750_SLS300175100_Victron_01.jpg?v=1789118632"},{"product_id":"victron-mc4-solar-connector-pair-male-female","title":"Victron Solar connector pair MC4, 1x Male\/1x Female - SCA520300000","description":"\u003ch1 style=\"color: #f87c24;\"\u003eVictron Energy Solar Connector Pair MC4, 1x Male \/ 1x Female\u003c\/h1\u003e\n\n\u003cp\u003eThis is a matched pair of MC4 solar connectors from Victron Energy, comprising one male and one female connector. Designed for joining PV cables in solar panel strings and array wiring, they are a standard component in any solar installation where reliable, weatherproof DC connections are required.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eSupplied as a matched pair: one male and one female MC4 connector ready for crimping and assembly.\u003c\/li\u003e\n  \u003cli\u003eMC4 format is the industry-standard connector type used across the vast majority of solar panels and PV cabling systems.\u003c\/li\u003e\n  \u003cli\u003eDesigned for outdoor use with weatherproof construction suitable for roof-mounted and ground-mounted PV arrays.\u003c\/li\u003e\n  \u003cli\u003eCompatible with standard solar PV cable used in residential and commercial installations.\u003c\/li\u003e\n  \u003cli\u003eVictron Energy branded, ensuring consistent quality with other Victron system components.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eProduct Overview\u003c\/h3\u003e\n\u003cp\u003eMC4 connectors are the standard termination method for solar PV strings in the UK and EU. This pair from Victron Energy allows installers to terminate, extend or repair PV cable runs without compromising the integrity of the DC circuit. The locking mechanism on MC4 connectors prevents accidental disconnection once mated, which is important in live DC systems where unintended disconnection can cause arcing.\u003c\/p\u003e\n\n\u003cp\u003eThese connectors are suitable for use when extending panel leads, building custom cable assemblies, or replacing damaged connectors on an existing array. They require a compatible MC4 crimping tool for correct assembly. Proper crimping is essential: a poorly crimped MC4 connector is a common cause of resistance heating and long-term failure in PV systems.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eSKU: SCA520300000\u003c\/li\u003e\n  \u003cli\u003eGTIN: 8719076025221\u003c\/li\u003e\n  \u003cli\u003eConnector type: MC4 (1x Male, 1x Female)\u003c\/li\u003e\n  \u003cli\u003eWeight: 0.019 kg (per pair)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eTerminating solar PV cable on residential rooftop installations.\u003c\/li\u003e\n  \u003cli\u003eExtending or joining panel string cables on ground-mounted arrays.\u003c\/li\u003e\n  \u003cli\u003eBuilding custom-length DC cable assemblies for off-grid and hybrid systems.\u003c\/li\u003e\n  \u003cli\u003eReplacing damaged or corroded MC4 connectors on existing PV installations.\u003c\/li\u003e\n  \u003cli\u003eUse with Victron MPPT charge controllers and other PV system components requiring MC4 input connections.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eWhat Is Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1x MC4 male connector\u003c\/li\u003e\n  \u003cli\u003e1x MC4 female connector\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eInstallation Notes\u003c\/h3\u003e\n\u003cp\u003eMC4 connectors must be assembled using a proper MC4 crimping tool. Do not use generic crimping tools, as incorrect crimp dimensions will result in a poor connection. Solar PV wiring in grid-connected systems in the UK must comply with BS 7671 and relevant G98 or G99 requirements. Installation of PV systems should be carried out by a qualified electrician or MCS-accredited installer. Never disconnect MC4 connectors under load: always isolate the circuit before working on DC connections.\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":55582496031011,"sku":"SCA520300000","price":7.13,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0863\/9001\/4243\/files\/VoltaconSolar_-_SCA520300000_-_Solar_connector_pair_MC4_1x_Male-1x_Female_2.webp?v=1789119097"},{"product_id":"victron-mc4-y-solar-splitter-pair","title":"Victron Solar splitter pair MC4-Y, 1x M-2F \/ 1xF-2M - SCA520500000","description":"\u003ch1 style=\"color: #f87c24;\"\u003eVictron Energy MC4-Y Solar Splitter Pair (1x M-2F \/ 1x F-2M)\u003c\/h1\u003e\n\n\u003cp\u003eThis Victron Energy MC4-Y splitter pair allows two solar panels to be connected in parallel directly at the array, without additional junction boxes or wiring runs back to the combiner. Supplied as a matched pair (one male-to-two-female and one female-to-two-male), it is suited to installers wiring parallel strings on residential and commercial PV systems.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eSupplied as a pair: one 1x M-2F connector and one 1x F-2M connector for a complete parallel branch connection.\u003c\/li\u003e\n  \u003cli\u003eMC4-compatible format, compatible with the industry-standard MC4 connector system used on the vast majority of solar panels.\u003c\/li\u003e\n  \u003cli\u003eEnables two panels to be connected in parallel without a separate combiner box or additional cable runs.\u003c\/li\u003e\n  \u003cli\u003eCompact and lightweight at 0.115 kg per pair, minimising additional load on mounting structures.\u003c\/li\u003e\n  \u003cli\u003eVictron Energy manufacture, consistent with the quality standards expected across the Victron solar accessory range.\u003c\/li\u003e\n  \u003cli\u003eSKU: SCA520500000 | GTIN: 8719076025238\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eProduct Overview\u003c\/h3\u003e\n\u003cp\u003eMC4-Y splitters are used when two solar panels need to share a single cable run to the charge controller or inverter input. The pair works together: the M-2F branch splits the positive conductor from one panel into two, while the F-2M branch does the same on the negative side, completing the parallel circuit. This approach keeps wiring tidy and reduces the number of cable runs across the roof or frame.\u003c\/p\u003e\n\n\u003cp\u003eUsing a matched pair from the same manufacturer ensures consistent contact resistance and weatherproofing across both poles of the connection. Mismatched or low-quality Y-connectors can introduce resistance imbalances between branches, which affects the current sharing between panels. Victron's MC4-Y pair is designed to avoid this by providing a consistent, rated connection at both poles simultaneously.\u003c\/p\u003e\n\n\u003cp\u003eThese splitters are appropriate for parallel wiring of panels with identical specifications. Connecting panels of different voltages or current ratings in parallel is not recommended and can lead to reverse current flow or reduced system performance.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eSKU: SCA520500000\u003c\/li\u003e\n  \u003cli\u003eGTIN: 8719076025238\u003c\/li\u003e\n  \u003cli\u003eConnector type: MC4-Y (industry-standard MC4 compatible)\u003c\/li\u003e\n  \u003cli\u003eConfiguration: 1x M-2F and 1x F-2M (supplied as a pair)\u003c\/li\u003e\n  \u003cli\u003eWeight: 0.115 kg (per pair)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eParallel wiring of two solar panels on residential rooftop PV installations.\u003c\/li\u003e\n  \u003cli\u003eOff-grid solar arrays where panels are combined in parallel to increase current output.\u003c\/li\u003e\n  \u003cli\u003eMarine and motorhome solar installations requiring compact parallel connections.\u003c\/li\u003e\n  \u003cli\u003eExpanding existing single-panel strings by adding a second panel in parallel.\u003c\/li\u003e\n  \u003cli\u003eCommercial flat-roof installations where minimising cable runs is a priority.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eWhat Is Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1x MC4-Y connector, male to two female (1x M-2F)\u003c\/li\u003e\n  \u003cli\u003e1x MC4-Y connector, female to two male (1x F-2M)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eInstallation Notes\u003c\/h3\u003e\n\u003cp\u003eMC4 connectors should be crimped and assembled using the correct MC4 crimping and assembly tools to ensure a weatherproof, low-resistance connection. Improper assembly can result in arcing, connector failure or water ingress. For grid-connected PV systems in the UK, installation must be carried out by a qualified and, where required, MCS-accredited installer to comply with G98 or G99 requirements and relevant wiring regulations. Only connect panels of identical voltage and current ratings in parallel. Do not mix panel types or ratings within the same parallel branch.\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":55582510121251,"sku":"SCA520500000","price":11.92,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0863\/9001\/4243\/files\/VoltaconSolar_-_SCA520500000_-_Solar_splitter_pair_MC4-Y_1x_M-2F_-_1xF-2M_00e414f1-bcb6-434c-9991-104e8fd5cc79.webp?v=1789119501"},{"product_id":"victron-solar-cable-3m-4mm2-mc4-connectors","title":"Victron Solarcable L=3m\/4sqmm MC4-M\/F conn. (PV-ST01) - SCA000300000","description":"\u003ch1 style=\"color: #f87c24;\"\u003eVictron Solar Cable 3m \/ 4mm² with MC4 Male and Female Connectors (PV-ST01)\u003c\/h1\u003e\n\n\u003cp\u003eA pre-assembled 3-metre solar cable from Victron Energy, fitted with MC4-compatible male and female connectors (PV-ST01 type). Designed for connecting solar panels to combiner boxes, charge controllers or other PV system components, this cable is suited to professional installers who need a reliable, ready-to-use solution without field-terminating connectors on site.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e3-metre length with 4mm² cross-section, suitable for standard residential and light commercial PV string wiring.\u003c\/li\u003e\n  \u003cli\u003ePre-fitted MC4-compatible male connector at one end and female connector at the other, ready for immediate installation.\u003c\/li\u003e\n  \u003cli\u003ePV-ST01 connector type, compatible with the widely used MC4 standard across most solar panel manufacturers.\u003c\/li\u003e\n  \u003cli\u003e4mm² conductor cross-section supports typical PV string currents while keeping resistive losses low over a 3-metre run.\u003c\/li\u003e\n  \u003cli\u003eSupplied by Victron Energy, ensuring consistent quality and compatibility with Victron PV system components.\u003c\/li\u003e\n  \u003cli\u003eLightweight at 0.384 kg, making it straightforward to handle during roof or ground-mount installations.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eProduct Overview\u003c\/h3\u003e\n\u003cp\u003eThis cable is intended for use in photovoltaic systems where a short, pre-terminated run is needed between a panel output and the next connection point in the string. The 4mm² conductor size is a common choice for residential PV installations, balancing current-carrying capacity with manageable cable diameter. Having the MC4 connectors factory-fitted removes the need for a crimping tool on site and reduces the risk of incorrectly terminated connections.\u003c\/p\u003e\n\n\u003cp\u003eThe PV-ST01 connector format is mechanically and electrically compatible with the MC4 standard, which is the dominant connector type used on solar panels globally. This means the cable can be used to extend or bridge panel connections in most standard PV arrays. The male-to-female configuration allows it to be inserted directly into an existing string without additional adapters.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eSKU: SCA000300000\u003c\/li\u003e\n  \u003cli\u003eCable length: 3 metres\u003c\/li\u003e\n  \u003cli\u003eConductor cross-section: 4mm²\u003c\/li\u003e\n  \u003cli\u003eConnector type: MC4-compatible (PV-ST01), male and female\u003c\/li\u003e\n  \u003cli\u003eWeight: 0.384 kg\u003c\/li\u003e\n  \u003cli\u003eGTIN: 8719076025146\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eExtending or bridging solar panel string connections in residential PV arrays.\u003c\/li\u003e\n  \u003cli\u003eConnecting panel outputs to string combiner boxes or DC isolators.\u003c\/li\u003e\n  \u003cli\u003eWiring panels to Victron SmartSolar or BlueSolar MPPT charge controllers in off-grid systems.\u003c\/li\u003e\n  \u003cli\u003eReplacement or repair of damaged PV inter-panel cables on existing installations.\u003c\/li\u003e\n  \u003cli\u003eShort panel-to-inverter or panel-to-combiner runs where a factory-terminated cable is preferred.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eWhat Is Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1 x 3-metre solar cable (4mm²) with MC4-compatible male connector (PV-ST01)\u003c\/li\u003e\n  \u003cli\u003e1 x MC4-compatible female connector (PV-ST01) pre-fitted to the opposite end\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eInstallation Notes\u003c\/h3\u003e\n\u003cp\u003eThis cable is intended for use in DC PV circuits and should be installed by a qualified electrician or MCS-accredited solar installer. Ensure the cable rating is appropriate for the open-circuit voltage and short-circuit current of your PV array before installation. MC4 connectors must only be mated and de-mated using the correct MC4 disconnect tool; do not attempt to separate live connectors by hand. All PV wiring should comply with BS 7671 and any applicable local regulations.\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":55582510285091,"sku":"SCA000300000","price":6.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0863\/9001\/4243\/files\/VoltaconSolar_-_SCA000300000_-_Solarcable_L_3m-4sqmm_MC4-M-F_conn._PV-ST01.webp?v=1789119509"},{"product_id":"victron-solar-cable-5m-4mm2-mc4-pv-st01","title":"Victron Solarcable L=5m\/4sqmm MC4-M\/F conn. (PV-ST01) - SCA000500000","description":"\u003ch1 style=\"color: #f87c24;\"\u003eVictron Solar Cable 5m \/ 4mm² with MC4 Male\/Female Connectors (PV-ST01)\u003c\/h1\u003e\n\n\u003cp\u003eThis is a pre-terminated 5-metre solar cable from Victron Energy, fitted with MC4-compatible male and female connectors (PV-ST01 type). It is designed for connecting solar panels to combiner boxes, charge controllers or other PV system components, and is suitable for use in both residential and commercial installations.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e5-metre length with 4mm² cross-section, suitable for standard residential and light commercial PV string wiring.\u003c\/li\u003e\n  \u003cli\u003ePre-fitted MC4-compatible male and female connectors (PV-ST01) at each end, ready for direct connection without additional tooling.\u003c\/li\u003e\n  \u003cli\u003eDouble-insulated construction rated for outdoor and rooftop use, with UV-resistant sheathing.\u003c\/li\u003e\n  \u003cli\u003eDesigned for DC solar applications, compatible with the voltage and current levels typical of modern PV panels and arrays.\u003c\/li\u003e\n  \u003cli\u003eSupplied by Victron Energy, ensuring consistent quality and compatibility with Victron MPPT charge controllers and other Victron PV system components.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eProduct Overview\u003c\/h3\u003e\n\u003cp\u003eThe 4mm² conductor cross-section is a widely used standard for PV string cables in the UK and EU. At this cross-section, the cable handles the current output of most standard solar panels without excessive resistive losses, making it appropriate for runs up to typical panel-to-combiner or panel-to-controller distances. The 5-metre length suits common roof layouts where panels are positioned close to the inverter or charge controller entry point.\u003c\/p\u003e\n\n\u003cp\u003eThe PV-ST01 MC4-compatible connectors are a common industry format, allowing straightforward connection to most solar panels and balance-of-system components that use the MC4 standard. The male and female pairing on a single cable means it can be used as an extension lead or as a direct interconnect between two components in a PV circuit.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eSKU: SCA000500000\u003c\/li\u003e\n  \u003cli\u003eCable length: 5 metres\u003c\/li\u003e\n  \u003cli\u003eConductor cross-section: 4mm²\u003c\/li\u003e\n  \u003cli\u003eConnector type: MC4-compatible, PV-ST01 (male and female)\u003c\/li\u003e\n  \u003cli\u003eWeight: 0.576 kg\u003c\/li\u003e\n  \u003cli\u003eGTIN: 8719076025160\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eExtending or interconnecting solar panel strings in rooftop PV installations.\u003c\/li\u003e\n  \u003cli\u003eConnecting individual panels to combiner boxes or DC isolators.\u003c\/li\u003e\n  \u003cli\u003eOff-grid solar systems using Victron MPPT charge controllers.\u003c\/li\u003e\n  \u003cli\u003eMobile and marine installations where a pre-terminated, weatherproof cable run is required.\u003c\/li\u003e\n  \u003cli\u003eReplacement or additional cabling for existing PV arrays using MC4-compatible connectors.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eWhat Is Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1 x 5-metre solar cable, 4mm², with MC4-compatible male connector at one end and female connector at the other (PV-ST01)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eInstallation Notes\u003c\/h3\u003e\n\u003cp\u003eDC solar wiring should be carried out by a qualified electrician or MCS-accredited installer. Ensure the cable rating is appropriate for the short-circuit current of your array before installation. MC4 connectors should only be mated and de-mated using the correct MC4 disconnect tool; do not disconnect under load. For grid-connected systems in the UK, all DC wiring must comply with the requirements of BS 7671 and any applicable G98 or G99 network operator conditions.\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":55582512808227,"sku":"SCA000500000","price":13.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0863\/9001\/4243\/files\/VoltaconSolar_-_SCA000500000_-_Solarcable_L_5m-4sqmm_MC4-M-F_conn._PV-ST01.webp?v=1789119565"},{"product_id":"victron-solar-cable-3m-6mm2-mc4-connectors","title":"Victron Solarcable L=3m\/6sqmm MC4-M\/F conn. (PV-ST01) - SCA000300100","description":"\u003ch1 style=\"color: #f87c24;\"\u003eVictron Solar Cable 3m 6mm² with MC4 Male\/Female Connectors (PV-ST01)\u003c\/h1\u003e\n\n\u003cp\u003eA pre-assembled 3-metre solar cable from Victron Energy, fitted with MC4-compatible male and female connectors (PV-ST01 type). Designed for connecting solar panels in residential, commercial and off-grid PV installations where a reliable, weatherproof cable assembly is required.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e3-metre length with 6mm² cross-section, suitable for standard string and parallel panel wiring configurations.\u003c\/li\u003e\n  \u003cli\u003ePre-fitted MC4-compatible male and female connectors (PV-ST01) for tool-free, secure connections between panels and combiner boxes or charge controllers.\u003c\/li\u003e\n  \u003cli\u003e6mm² conductor cross-section supports higher current capacity, reducing resistive losses over longer cable runs.\u003c\/li\u003e\n  \u003cli\u003eUV-resistant and weatherproof outer sheathing rated for outdoor solar installations.\u003c\/li\u003e\n  \u003cli\u003eSingle-cable assembly with one male and one female connector, ready to use straight from the box.\u003c\/li\u003e\n  \u003cli\u003eSupplied by Victron Energy, a manufacturer with a consistent track record in solar and off-grid power components.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eProduct Overview\u003c\/h3\u003e\n\u003cp\u003eThis cable assembly uses a 6mm² conductor, which is the preferred cross-section for most residential and light commercial solar strings where cable runs exceed a few metres. Compared to 4mm² cable, the larger conductor reduces voltage drop and heat build-up under sustained current loads, which matters in systems where panels are mounted at a distance from the inverter or charge controller.\u003c\/p\u003e\n\n\u003cp\u003eThe PV-ST01 MC4-compatible connectors are a widely used standard in the solar industry. The male and female pairing on a single cable allows direct panel-to-panel extension or connection to existing MC4 wiring without additional adapters. The connectors are designed for outdoor use and provide a weatherproof, locking connection when mated correctly.\u003c\/p\u003e\n\n\u003cp\u003eAt 3 metres, this cable is well suited to bridging the gap between adjacent panels, extending a panel lead to reach a combiner box, or making up a short inter-row connection. For longer runs, multiple assemblies can be chained, or a custom-length cable should be used.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eSKU: SCA000300100\u003c\/li\u003e\n  \u003cli\u003eCable length: 3 metres\u003c\/li\u003e\n  \u003cli\u003eConductor cross-section: 6mm²\u003c\/li\u003e\n  \u003cli\u003eConnector type: MC4-compatible, male and female (PV-ST01)\u003c\/li\u003e\n  \u003cli\u003eWeight: 0.432 kg\u003c\/li\u003e\n  \u003cli\u003eGTIN: 8719076025153\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eExtending solar panel leads to reach a combiner box or charge controller input.\u003c\/li\u003e\n  \u003cli\u003ePanel-to-panel connections in string or parallel wiring configurations.\u003c\/li\u003e\n  \u003cli\u003eOff-grid solar systems using Victron MPPT charge controllers or third-party equipment with MC4 inputs.\u003c\/li\u003e\n  \u003cli\u003eRoof-mounted and ground-mounted PV arrays where a short, pre-terminated cable run is needed.\u003c\/li\u003e\n  \u003cli\u003eReplacement or additional cabling for existing MC4-wired installations.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eWhat Is Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1 x 3-metre solar cable, 6mm², with one MC4-compatible male connector (PV-ST01) and one MC4-compatible female connector (PV-ST01) pre-fitted.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eInstallation Notes\u003c\/h3\u003e\n\u003cp\u003eSolar PV wiring should be carried out by a qualified electrician or MCS-accredited installer. Ensure the cable and connectors are compatible with the current and voltage ratings of your specific system before installation. MC4 connectors should only be mated and de-mated using the correct MC4 disconnect tool; do not attempt to separate live connectors by hand. For grid-connected systems in the UK, all DC wiring must comply with the requirements of the relevant wiring regulations and any applicable G98 or G99 connection agreement.\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":55582525751587,"sku":"SCA000300100","price":9.52,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0863\/9001\/4243\/files\/VoltaconSolar_-_SCA000300100_-_Solarcable_L_3m-6sqmm_MC4-M-F_conn._PV-ST01.webp?v=1789119895"},{"product_id":"victron-solar-cable-10m-6mm2-mc4-pv-st01","title":"Victron Solarcable L=10m\/6sqmm MC4-M\/F conn. (PV-ST01) - SCA001000100","description":"\u003ch1 style=\"color: #f87c24;\"\u003eVictron Solar Cable 10m \/ 6mm² with MC4 Male and Female Connectors (PV-ST01)\u003c\/h1\u003e\n\n\u003cp\u003eThis is a pre-assembled 10-metre solar DC cable from Victron Energy, supplied with MC4-compatible male and female connectors (PV-ST01 type) fitted at each end. It is designed for connecting solar panels to combiner boxes, charge controllers or inverter inputs in both off-grid and grid-tied PV installations.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e10-metre length with 6mm² cross-section, suitable for runs requiring low voltage drop on higher-current PV strings.\u003c\/li\u003e\n  \u003cli\u003ePre-fitted MC4-compatible male and female connectors (PV-ST01) at each end, ready to connect without additional crimping tools.\u003c\/li\u003e\n  \u003cli\u003e6mm² conductor cross-section supports higher current capacity compared to standard 4mm² PV cable, reducing resistive losses over longer runs.\u003c\/li\u003e\n  \u003cli\u003eDesigned for outdoor UV exposure in solar PV applications, with insulation rated for direct sunlight and weathering.\u003c\/li\u003e\n  \u003cli\u003eSingle-cable assembly covers both positive and negative connections when used as a pair, or extends an existing string in one polarity.\u003c\/li\u003e\n  \u003cli\u003eSKU SCA001000100, GTIN 8719076025184, weight approximately 1.5kg.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eProduct Overview\u003c\/h3\u003e\n\u003cp\u003eThe 6mm² conductor cross-section is a practical choice where panel strings produce higher short-circuit currents, or where cable runs are long enough that a 4mm² cable would introduce meaningful voltage drop. For a typical 10-metre run at currents above 10A, the larger conductor keeps losses within acceptable limits without requiring parallel cabling.\u003c\/p\u003e\n\n\u003cp\u003eThe PV-ST01 MC4-compatible connectors are a widely used standard across the solar industry. They mate directly with the connectors found on most crystalline and thin-film panels, as well as with MC4 inputs on Victron SmartSolar and BlueSolar MPPT charge controllers. The pre-assembled format means no field crimping is required, which reduces the risk of connection faults that can cause arc events or premature connector failure.\u003c\/p\u003e\n\n\u003cp\u003eThis cable is supplied as a single assembly with one male and one female connector. Depending on the wiring configuration, you may need one cable per polarity or multiple cables to extend a string. Check your system's current rating and voltage drop requirements before selecting cable length and cross-section.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eSKU: SCA001000100\u003c\/li\u003e\n  \u003cli\u003eCable length: 10 metres\u003c\/li\u003e\n  \u003cli\u003eConductor cross-section: 6mm²\u003c\/li\u003e\n  \u003cli\u003eConnectors: MC4-compatible male and female (PV-ST01 type)\u003c\/li\u003e\n  \u003cli\u003eWeight: 1.498kg\u003c\/li\u003e\n  \u003cli\u003eGTIN: 8719076025184\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eExtending PV string cables between solar panels and a combiner box or charge controller.\u003c\/li\u003e\n  \u003cli\u003eConnecting solar arrays to Victron SmartSolar or BlueSolar MPPT charge controllers.\u003c\/li\u003e\n  \u003cli\u003eOff-grid cabin, van and marine solar installations where longer cable runs are required.\u003c\/li\u003e\n  \u003cli\u003eCommercial rooftop or ground-mount PV systems requiring pre-terminated DC cabling.\u003c\/li\u003e\n  \u003cli\u003eReplacement or repair of damaged PV string cables on existing installations.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eWhat Is Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1 x 10-metre solar DC cable, 6mm² cross-section\u003c\/li\u003e\n  \u003cli\u003e1 x MC4-compatible male connector (PV-ST01), factory fitted\u003c\/li\u003e\n  \u003cli\u003e1 x MC4-compatible female connector (PV-ST01), factory fitted\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eInstallation Notes\u003c\/h3\u003e\n\u003cp\u003eDC solar cables carry voltage whenever the panels are exposed to light. There is no way to isolate a PV string without a dedicated DC isolator switch. All connections should be made by a qualified electrician or MCS-accredited installer. Verify that the cable's current rating is appropriate for the short-circuit current of your panel string before installation. Do not mix connector brands within the same string, as mismatched MC4-type connectors can cause arcing and void warranties. For grid-connected systems in the UK, ensure the full installation meets G98 or G99 requirements as applicable.\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":55582527848739,"sku":"SCA001000100","price":30.98,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0863\/9001\/4243\/files\/VoltaconSolar_-_SCA001000100_-_Solarcable_L_10m-6sqmm_MC4-M-F_conn._PV-ST01_af696cdb-25d6-45e1-ade8-b2e13d8273ff.webp?v=1789119998"},{"product_id":"victron-solar-cable-1m-6mm2-mc4-connectors","title":"Victron Solarcable L=1m\/6sqmm MC4-M\/F conn. (PV-ST01) - SCA000100100","description":"\u003ch1 style=\"color: #f87c24;\"\u003eVictron Solar Cable 1m 6mm² with MC4 Male\/Female Connectors (PV-ST01)\u003c\/h1\u003e\n\n\u003cp\u003eA pre-assembled 1 metre solar cable from Victron Energy, fitted with MC4-compatible male and female connectors (PV-ST01 type). Designed for connecting solar panels in residential, commercial and off-grid PV installations where a short, ready-to-use extension or bridging cable is needed.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1 metre length, suitable for short panel-to-panel or panel-to-combiner connections.\u003c\/li\u003e\n  \u003cli\u003e6mm² cross-section conductor, rated for the current demands of standard residential and commercial PV strings.\u003c\/li\u003e\n  \u003cli\u003ePre-fitted MC4-compatible male and female connectors (PV-ST01), ready to connect without additional tooling.\u003c\/li\u003e\n  \u003cli\u003eSingle cable with one male and one female end, allowing direct in-line extension of existing PV wiring.\u003c\/li\u003e\n  \u003cli\u003eSupplied by Victron Energy, manufactured to the quality standards expected in professional solar installations.\u003c\/li\u003e\n  \u003cli\u003eLightweight at 0.144kg, easy to handle and route in tight spaces.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eProduct Overview\u003c\/h3\u003e\n\u003cp\u003eThis cable uses a 6mm² conductor, which is the standard cross-section for most residential and light commercial PV string wiring in the UK and EU. A larger conductor reduces resistive losses over the cable run and is particularly relevant where panels are wired in series strings with higher open-circuit voltages. At 1 metre, this cable is best suited to bridging short gaps between panels, connecting to junction boxes, or extending existing wiring by a small amount without introducing unnecessary resistance.\u003c\/p\u003e\n\n\u003cp\u003eThe PV-ST01 MC4-compatible connectors are a widely used standard in the solar industry. The male and female ends allow this cable to be inserted directly into an existing PV circuit without any additional connectors or crimping. For installations requiring longer runs or different conductor sizes, Victron offers additional solar cable options to suit.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eSKU: SCA000100100\u003c\/li\u003e\n  \u003cli\u003eCable length: 1 metre\u003c\/li\u003e\n  \u003cli\u003eConductor cross-section: 6mm²\u003c\/li\u003e\n  \u003cli\u003eConnector type: MC4-compatible, male and female (PV-ST01)\u003c\/li\u003e\n  \u003cli\u003eWeight: 0.144kg\u003c\/li\u003e\n  \u003cli\u003eGTIN: 8719076025139\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eExtending or bridging PV panel wiring in rooftop solar installations.\u003c\/li\u003e\n  \u003cli\u003eConnecting solar panels to string combiners or junction boxes.\u003c\/li\u003e\n  \u003cli\u003eOff-grid solar systems where short cable runs are required between panels and charge controllers.\u003c\/li\u003e\n  \u003cli\u003eReplacement or repair of damaged short-run PV cabling on existing installations.\u003c\/li\u003e\n  \u003cli\u003eMobile and marine solar setups using standard MC4 panel connectors.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eWhat Is Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1x Victron solar cable, 1m, 6mm², with MC4-compatible male connector (one end) and MC4-compatible female connector (other end).\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eInstallation Notes\u003c\/h3\u003e\n\u003cp\u003eMC4 connectors should only be mated and de-mated using the correct MC4 disconnect tool to avoid damage to the connector housing. PV string wiring operates at potentially high DC voltages. All solar PV installation and wiring work should be carried out by a qualified electrician or MCS-accredited installer in accordance with BS 7671 and relevant IET wiring regulations. Do not connect or disconnect MC4 connectors under load.\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":55582527947043,"sku":"SCA000100100","price":7.94,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0863\/9001\/4243\/files\/VoltaconSolar_-_SCA000100100_-_Solarcable_L_1m-6sqmm_MC4-M-F_conn._PV-ST01.webp?v=1789120006"},{"product_id":"mc4-male-mc3-female-solar-adapter-cable-15cm","title":"Victron Solar adaptercable MC4\/M to MC3\/F L=15cm - SCA500100000","description":"\u003ch1 style=\"color: #f87c24;\"\u003eSolar Adapter Cable MC4 Male to MC3 Female 15cm\u003c\/h1\u003e\n\n\u003cp\u003eThis short adapter cable converts an MC4 male connector to an MC3 female connector, allowing MC4-terminated solar panels or cables to connect to older MC3-compatible equipment. It is a practical solution for mixed-connector installations where MC4 and MC3 components need to interface without replacing existing wiring.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eMC4 male connector on one end, MC3 female connector on the other, enabling direct MC4-to-MC3 interfacing.\u003c\/li\u003e\n  \u003cli\u003eCable length of 15cm keeps the adapter compact and tidy within a junction box or panel array.\u003c\/li\u003e\n  \u003cli\u003eSupplied by Victron Energy, manufactured to consistent quality standards for solar DC wiring applications.\u003c\/li\u003e\n  \u003cli\u003eLightweight at 35g, adding negligible weight to any installation.\u003c\/li\u003e\n  \u003cli\u003eSKU SCA500100000 for straightforward ordering and stock management.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eProduct Overview\u003c\/h3\u003e\n\u003cp\u003eMC4 connectors are the current standard for solar panel wiring, while MC3 connectors were widely used in earlier installations and on some legacy charge controllers and combiner boxes. Where these two systems meet, a direct connection is not possible without an adapter. This cable bridges that gap cleanly, with a 15cm length that is long enough to make the connection without creating excess slack.\u003c\/p\u003e\n\n\u003cp\u003eThe male MC4 end accepts the female MC4 connector found on most modern solar panels and extension cables. The female MC3 end plugs into the male MC3 output of older equipment. This orientation is fixed, so confirm the connector genders on your specific components before ordering.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eSKU: SCA500100000\u003c\/li\u003e\n  \u003cli\u003eConnector A: MC4 male\u003c\/li\u003e\n  \u003cli\u003eConnector B: MC3 female\u003c\/li\u003e\n  \u003cli\u003eCable length: 15cm\u003c\/li\u003e\n  \u003cli\u003eWeight: 0.035kg (35g)\u003c\/li\u003e\n  \u003cli\u003eGTIN: 8719076025207\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eConnecting MC4-terminated solar panels to legacy MC3-compatible charge controllers.\u003c\/li\u003e\n  \u003cli\u003eAdapting modern solar extension cables to older MC3 combiner boxes or junction points.\u003c\/li\u003e\n  \u003cli\u003eRetrofit and upgrade installations where MC3 equipment is being retained alongside newer MC4 components.\u003c\/li\u003e\n  \u003cli\u003eOff-grid systems where older charge controllers with MC3 inputs are still in service.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eWhat Is Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1 x Solar adapter cable, MC4 male to MC3 female, 15cm\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eInstallation Notes\u003c\/h3\u003e\n\u003cp\u003eVerify the connector gender and type on both the panel side and the equipment side before installation. MC4 and MC3 connectors are not interchangeable without an adapter, and incorrect pairing can result in poor contact or damage. Solar DC wiring carries live voltage whenever panels are exposed to light. All wiring work should be carried out by a qualified electrician or accredited solar installer. For grid-connected systems, ensure compliance with G98 or G99 requirements as applicable.\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":55582528012579,"sku":"SCA500100000","price":6.96,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0863\/9001\/4243\/files\/VoltaconSolar_-_SCA500100000_-_Solar_adaptercable_MC4-M_to_MC3-F_L_15cm_eaccd6e7-ddc6-4ec5-a51e-4356dc20c79c.webp?v=1789120015"},{"product_id":"victron-solar-cable-1m-4mm2-mc4-connectors","title":"Victron Solarcable L=1m\/4sqmm MC4-M\/F conn. (PV-ST01) - SCA000100000","description":"\u003ch1 style=\"color: #f87c24;\"\u003eVictron Solar Cable 1m \/ 4mm² with MC4 Male and Female Connectors (PV-ST01)\u003c\/h1\u003e\n\n\u003cp\u003eThis is a pre-terminated 1 metre solar cable from Victron Energy, fitted with MC4-compatible male and female connectors (PV-ST01 type). It is designed for use in photovoltaic systems where a short, ready-made interconnect cable is needed between panels, combiners or junction points. Suitable for trade and professional installers working on residential and commercial PV installations.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e4mm² cross-section conductor, appropriate for standard residential and light commercial PV string wiring.\u003c\/li\u003e\n  \u003cli\u003ePre-fitted MC4-compatible male connector at one end and female connector at the other, ready for immediate use.\u003c\/li\u003e\n  \u003cli\u003ePV-ST01 connector type, compatible with the widely used MC4 standard across most panel manufacturers.\u003c\/li\u003e\n  \u003cli\u003e1 metre fixed length, suited to short panel-to-panel or panel-to-combiner connections.\u003c\/li\u003e\n  \u003cli\u003eSupplied by Victron Energy, a manufacturer with an established track record in solar and off-grid power equipment.\u003c\/li\u003e\n  \u003cli\u003eLightweight at 0.115 kg, easy to handle and route in tight installation spaces.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eProduct Overview\u003c\/h3\u003e\n\u003cp\u003eThe 4mm² conductor size is the standard choice for most residential PV string wiring in the UK, balancing current-carrying capacity with manageable cable diameter. At 1 metre, this cable is intended for short interconnections rather than long runs. It is not a general-purpose extension cable; it is best used where a precise, short link is required between adjacent components.\u003c\/p\u003e\n\n\u003cp\u003eThe MC4-compatible PV-ST01 connectors are factory-fitted, which removes the need for field crimping and reduces the risk of poorly terminated connections. MC4 connectors are the dominant standard across the solar industry, and PV-ST01 type connectors are compatible with the vast majority of solar panels and accessories currently in use. The male-to-female configuration means this cable can be inserted directly into a PV string without additional adapters in most cases.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eSKU: SCA000100000\u003c\/li\u003e\n  \u003cli\u003eCable length: 1 metre\u003c\/li\u003e\n  \u003cli\u003eConductor cross-section: 4mm²\u003c\/li\u003e\n  \u003cli\u003eConnector type: MC4-compatible PV-ST01 (male and female)\u003c\/li\u003e\n  \u003cli\u003eWeight: 0.115 kg\u003c\/li\u003e\n  \u003cli\u003eGTIN: 8719076025122\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eShort panel-to-panel interconnections within a PV array.\u003c\/li\u003e\n  \u003cli\u003eConnecting solar panels to string combiners or junction boxes.\u003c\/li\u003e\n  \u003cli\u003eBridging small gaps between PV components during system assembly or modification.\u003c\/li\u003e\n  \u003cli\u003eReplacement or extension of existing MC4-terminated cable runs where a 1 metre section is required.\u003c\/li\u003e\n  \u003cli\u003eResidential and light commercial rooftop PV installations.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eWhat Is Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1 x 1 metre solar cable, 4mm², with MC4-compatible male connector (one end) and female connector (other end).\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eInstallation Notes\u003c\/h3\u003e\n\u003cp\u003eSolar PV wiring should be carried out by a qualified electrician or MCS-accredited installer in accordance with BS 7671 and any applicable local regulations. MC4 connectors should only be mated and de-mated using the correct tools; do not attempt to disconnect live MC4 connectors by hand. Ensure the cable rating is appropriate for the maximum short-circuit current of the PV string before installation. For grid-connected systems, G98 or G99 notification requirements apply depending on system size.\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":55582528176419,"sku":"SCA000100000","price":6.96,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0863\/9001\/4243\/files\/VoltaconSolar_-_SCA000100000_-_Solarcable_L_1m-4sqmm_MC4-M-F_conn._PV-ST01.webp?v=1789120023"},{"product_id":"victron-solar-cable-20m-6mm2-mc4-pv-st01","title":"Victron Solarcable L=20m\/6sqmm MC4-M\/F conn. (PV-ST01) - SCA002000100","description":"\u003ch1 style=\"color: #f87c24;\"\u003eVictron Solar Cable 20m \/ 6mm² with MC4 Male\/Female Connectors (PV-ST01)\u003c\/h1\u003e\n\n\u003cp\u003eThis is a pre-assembled 20-metre solar DC cable from Victron Energy, supplied with MC4-compatible male and female connectors (PV-ST01 type) fitted at each end. It is intended for connecting solar panels to charge controllers, combiner boxes or other DC system components in both off-grid and grid-tied installations.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e20-metre length provides sufficient reach for most roof-to-inverter or panel-to-combiner runs without the need for additional joins.\u003c\/li\u003e\n  \u003cli\u003e6mm² cross-section conductor is suited to higher-current PV string runs, reducing resistive losses over longer cable distances.\u003c\/li\u003e\n  \u003cli\u003eMC4-compatible male and female connectors (PV-ST01) are pre-fitted, allowing direct plug-in connection to standard MC4 panel leads.\u003c\/li\u003e\n  \u003cli\u003eSolar-rated cable construction is designed for outdoor UV exposure, temperature cycling and the DC voltage levels present in PV systems.\u003c\/li\u003e\n  \u003cli\u003eSingle-cable assembly with one male and one female end simplifies polarity management during installation.\u003c\/li\u003e\n  \u003cli\u003eSupplied by Victron Energy, ensuring consistent build quality and compatibility with Victron system components.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eProduct Overview\u003c\/h3\u003e\n\u003cp\u003eSolar DC cabling is a frequent source of system losses and faults when undersized or poorly terminated. A 6mm² conductor at 20 metres keeps voltage drop within acceptable limits for string currents typically seen in residential and light commercial PV arrays. Pre-fitted MC4-compatible connectors remove the need for field crimping, which reduces the risk of poorly terminated joints that can cause arcing or increased resistance over time.\u003c\/p\u003e\n\n\u003cp\u003eThe PV-ST01 connector type used here is a widely adopted MC4-compatible format, compatible with the panel leads found on the majority of crystalline and thin-film modules. The cable itself is rated for direct outdoor exposure, with insulation and jacketing appropriate for the UV intensity, temperature range and DC voltage levels found in rooftop and ground-mount PV installations.\u003c\/p\u003e\n\n\u003cp\u003eAt 3kg, this 20-metre assembly is straightforward to handle and route on site. It is suitable for use as an extension lead between a panel string and a charge controller or inverter input, or as a run between a combiner box and the main DC distribution point.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eSKU: SCA002000100\u003c\/li\u003e\n  \u003cli\u003eCable length: 20 metres\u003c\/li\u003e\n  \u003cli\u003eConductor cross-section: 6mm²\u003c\/li\u003e\n  \u003cli\u003eConnector type: MC4-compatible, PV-ST01 (male and female, one of each)\u003c\/li\u003e\n  \u003cli\u003eWeight: 3.024kg\u003c\/li\u003e\n  \u003cli\u003eGTIN: 8719076025191\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eExtending PV string leads from roof-mounted panels to a ground-floor inverter or charge controller.\u003c\/li\u003e\n  \u003cli\u003eConnecting a combiner box output to the DC input of a Victron MPPT charge controller or MultiPlus inverter\/charger.\u003c\/li\u003e\n  \u003cli\u003eOff-grid cabin, caravan and marine solar installations where a longer DC cable run is required.\u003c\/li\u003e\n  \u003cli\u003eGround-mount solar arrays where panels are located at a distance from the battery or inverter enclosure.\u003c\/li\u003e\n  \u003cli\u003eReplacement or supplementary cabling in existing PV systems using MC4-compatible connectors.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eWhat Is Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1 x 20-metre solar cable, 6mm², with pre-fitted MC4-compatible male connector (PV-ST01) at one end and MC4-compatible female connector (PV-ST01) at the other end.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eInstallation Notes\u003c\/h3\u003e\n\u003cp\u003eDC solar cabling should be installed by a qualified electrician or MCS-accredited installer. Ensure the cable rating is appropriate for the maximum open-circuit voltage and short-circuit current of the connected PV array before installation. Do not mix MC4-compatible connectors from different manufacturers in the same circuit, as dimensional tolerances can vary and may result in poor contact or ingress protection. Verify that the conductor cross-section is adequate for the system's maximum current and cable run length to keep voltage drop within acceptable limits. For grid-connected systems, all DC wiring must comply with the relevant requirements of BS 7671 and any applicable G98 or G99 connection agreement.\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":55582774198563,"sku":"SCA002000100","price":57.2,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0863\/9001\/4243\/files\/SCA002000100.jpg?v=1789122313"},{"product_id":"victron-solar-cable-5m-6mm2-mc4-connectors","title":"Victron Solarcable L=5m\/6sqmm MC4-M\/F conn. (PV-ST01) - SCA000500100","description":"\u003ch1 style=\"color: #f87c24;\"\u003eVictron Solar Cable 5m \/ 6mm² with MC4 Male and Female Connectors (PV-ST01)\u003c\/h1\u003e\n\n\u003cp\u003eThis is a pre-assembled 5-metre solar DC cable from Victron Energy, fitted with MC4-compatible male and female connectors (PV-ST01 type). It is designed for connecting solar panels to combiner boxes, charge controllers or other DC wiring in PV installations. The 6mm² cross-section suits higher-current panel strings where voltage drop and heat dissipation matter.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e5-metre length, ready to install with no additional crimping or termination required.\u003c\/li\u003e\n  \u003cli\u003e6mm² conductor cross-section, suitable for higher-current PV string connections.\u003c\/li\u003e\n  \u003cli\u003eFitted with MC4-compatible PV-ST01 male and female connectors, one at each end.\u003c\/li\u003e\n  \u003cli\u003eDesigned for outdoor DC solar applications with UV-resistant cable construction.\u003c\/li\u003e\n  \u003cli\u003eSupplied by Victron Energy, manufactured to consistent quality standards for PV use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eProduct Overview\u003c\/h3\u003e\n\u003cp\u003ePre-terminated solar cables remove the risk of incorrectly crimped or mismatched connectors on site. This cable arrives with a PV-ST01 MC4-compatible male connector at one end and a female connector at the other, making it a direct extension or interconnect cable for standard MC4-equipped panels and components.\u003c\/p\u003e\n\n\u003cp\u003eThe 6mm² conductor is the correct choice where cable runs are longer or where panel current output is higher, as it reduces resistive losses compared to the more common 4mm² option. For a 5-metre run at typical residential or commercial string currents, 6mm² keeps voltage drop within acceptable limits and reduces heat build-up in the cable.\u003c\/p\u003e\n\n\u003cp\u003eMC4 (PV-ST01) connectors are the industry standard for solar panel interconnection. They are rated for outdoor use, provide a secure locking connection, and are compatible with the vast majority of solar panels and DC components on the market. Always verify connector brand compatibility before mixing connector types on the same string.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eSKU: SCA000500100\u003c\/li\u003e\n  \u003cli\u003eCable length: 5 metres\u003c\/li\u003e\n  \u003cli\u003eConductor cross-section: 6mm²\u003c\/li\u003e\n  \u003cli\u003eConnector type: MC4-compatible PV-ST01, male and female\u003c\/li\u003e\n  \u003cli\u003eWeight: 0.768 kg\u003c\/li\u003e\n  \u003cli\u003eGTIN: 8719076025177\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eExtending or interconnecting solar panel strings in residential and commercial PV installations.\u003c\/li\u003e\n  \u003cli\u003eConnecting panels to string combiner boxes or DC isolators.\u003c\/li\u003e\n  \u003cli\u003eOff-grid solar systems where panels feed directly into a charge controller or inverter-charger.\u003c\/li\u003e\n  \u003cli\u003eReplacement or additional cabling for existing MC4-equipped PV arrays.\u003c\/li\u003e\n  \u003cli\u003eMarine and mobile solar installations using standard MC4-compatible panels.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eWhat Is Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1 x Victron solar cable, 5m, 6mm², with MC4-compatible PV-ST01 male connector at one end and female connector at the other.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eInstallation Notes\u003c\/h3\u003e\n\u003cp\u003eDC solar wiring should be carried out by a qualified electrician or MCS-accredited installer. Ensure the cable polarity is correct before making any connections, and confirm that the PV-ST01 connectors are compatible with the connector brand used elsewhere in the string. Do not mix connector brands on the same string without verifying cross-compatibility, as this can create a fire or arc-fault risk. For grid-connected systems, all DC wiring must comply with current UK wiring regulations and any applicable G98 or G99 requirements.\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":55582774362403,"sku":"SCA000500100","price":14.31,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0863\/9001\/4243\/files\/VoltaconSolar_-_SCA000500100_-_Solarcable_L_5m-6sqmm_MC4-M-F_conn._PV-ST01.webp?v=1789122321"},{"product_id":"mc4-female-mc3-male-solar-adapter-cable-15cm","title":"Victron Solar adaptercable MC4\/F to MC3\/M L=15cm - SCA500200000","description":"\u003ch1 style=\"color: #f87c24;\"\u003eSolar Adapter Cable MC4 Female to MC3 Male 15cm\u003c\/h1\u003e\n\n\u003cp\u003eThis short adapter cable converts an MC4 female connector to an MC3 male connector, allowing solar panels or cables terminated in MC4 to connect to MC3-compatible charge controllers, junction boxes or existing wiring. It is a practical solution for installers working with mixed-connector systems or legacy equipment.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eMC4 female input to MC3 male output, 15cm cable length\u003c\/li\u003e\n  \u003cli\u003eEnables direct connection between MC4 and MC3 solar connector systems without additional tools or crimping\u003c\/li\u003e\n  \u003cli\u003eCompact 15cm length minimises excess cable in tight enclosures or junction boxes\u003c\/li\u003e\n  \u003cli\u003eSupplied by Victron Energy, manufactured to solar cable standards for outdoor PV use\u003c\/li\u003e\n  \u003cli\u003eLightweight at 35g, suitable for permanent installation in panel arrays or combiner boxes\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eProduct Overview\u003c\/h3\u003e\n\u003cp\u003eMC4 and MC3 connectors are not directly compatible, and mismatched connector types are a common issue when integrating newer panels with older charge controllers or when extending existing MC3-based systems. This adapter cable bridges that gap without requiring re-termination or additional connector hardware.\u003c\/p\u003e\n\n\u003cp\u003eAt 15cm, the cable is designed for short-reach connections rather than cable runs. It is best used at the point of connection between a panel lead and a controller input, or within a combiner box where space is limited. The MC4 female end accepts a standard MC4 male plug from a panel or extension cable, while the MC3 male end plugs directly into an MC3 female socket on the receiving equipment.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eSKU: SCA500200000\u003c\/li\u003e\n  \u003cli\u003eConnector type: MC4 female to MC3 male\u003c\/li\u003e\n  \u003cli\u003eCable length: 15cm\u003c\/li\u003e\n  \u003cli\u003eWeight: 35g\u003c\/li\u003e\n  \u003cli\u003eGTIN: 8719076025214\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eConnecting MC4-terminated solar panels to MC3-input charge controllers\u003c\/li\u003e\n  \u003cli\u003eIntegrating new panels into existing MC3-based off-grid systems\u003c\/li\u003e\n  \u003cli\u003eUse within combiner boxes or junction enclosures where connector types differ\u003c\/li\u003e\n  \u003cli\u003eRetrofit installations where replacing existing MC3 wiring is not practical\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eWhat Is Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1x Solar adapter cable, MC4 female to MC3 male, 15cm\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eInstallation Notes\u003c\/h3\u003e\n\u003cp\u003eThis adapter is intended for use in low-voltage DC solar PV circuits. Ensure the cable and connectors are rated for the voltage and current of your system before installation. Solar PV wiring should be carried out by a qualified electrician or accredited installer. Do not use this adapter in applications that exceed the connector ratings, and ensure all connections are fully seated and weatherproofed where exposed to the elements.\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":55582780096803,"sku":"SCA500200000","price":5.56,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0863\/9001\/4243\/files\/victron_sca500200000_mc4_mc3_solar_adapter_cable_15cm.webp?v=1789122362"},{"product_id":"victron-235w-monocrystalline-solar-panel-72-cell","title":"Victron Solar Panel 235W-72 cells Mono 1350x880x30mm series 4d - SPM042357204","description":"\u003ch1 style=\"color: #f87c24;\"\u003eVictron Energy 235W Monocrystalline Solar Panel 72-Cell 1350x880x30mm (Series 4d)\u003c\/h1\u003e\n\n\u003cp\u003eThe Victron Energy 235W monocrystalline solar panel is a 72-cell module designed for professional solar installations where reliable DC generation is required. At 235 watts peak output, it suits off-grid systems, battery charging arrays and commercial installations where space and weight are managed carefully.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e235W peak power output from a 72-cell monocrystalline silicon cell configuration.\u003c\/li\u003e\n  \u003cli\u003eCompact frame dimensions of 1350 x 880 x 30mm, suitable for installations with limited roof or ground space.\u003c\/li\u003e\n  \u003cli\u003eMonocrystalline cell technology delivers higher conversion efficiency per unit area compared to polycrystalline alternatives.\u003c\/li\u003e\n  \u003cli\u003ePanel weight of 12.48kg, appropriate for standard roof mounting structures.\u003c\/li\u003e\n  \u003cli\u003ePart of Victron Energy's Series 4d panel range, manufactured to consistent quality standards across the product line.\u003c\/li\u003e\n  \u003cli\u003eSKU SPM042357204 with GTIN 8719076079453 for straightforward procurement and stock management.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eProduct Overview\u003c\/h3\u003e\n\u003cp\u003eThis panel uses monocrystalline silicon cells, which are cut from a single crystal structure. This gives them a uniform dark appearance and a higher efficiency rating than polycrystalline panels of the same physical size. For installers working with constrained array footprints, this matters in practice: more watts per square metre means fewer panels needed to meet a given system output target.\u003c\/p\u003e\n\n\u003cp\u003eThe 72-cell layout is a standard commercial format, producing a higher open-circuit voltage than the more common 60-cell residential panels. This makes the Series 4d well suited to systems using MPPT charge controllers or inverter-chargers configured for higher string voltages. Installers should verify string voltage calculations against the charge controller or inverter input specifications before finalising array design.\u003c\/p\u003e\n\n\u003cp\u003eAt 30mm frame depth and 12.48kg, the panel is compatible with most standard aluminium rail mounting systems. The Series 4d designation indicates this is a defined product generation within Victron's panel catalogue, allowing consistent specification across multi-panel orders.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003ePeak Power: 235W\u003c\/li\u003e\n  \u003cli\u003eCell Type: Monocrystalline silicon\u003c\/li\u003e\n  \u003cli\u003eNumber of Cells: 72\u003c\/li\u003e\n  \u003cli\u003eDimensions: 1350 x 880 x 30mm\u003c\/li\u003e\n  \u003cli\u003eWeight: 12.48kg\u003c\/li\u003e\n  \u003cli\u003eSeries: 4d\u003c\/li\u003e\n  \u003cli\u003eSKU: SPM042357204\u003c\/li\u003e\n  \u003cli\u003eGTIN: 8719076079453\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eOff-grid battery charging systems using Victron MPPT charge controllers.\u003c\/li\u003e\n  \u003cli\u003eRemote power installations including telecoms, agricultural and rural sites.\u003c\/li\u003e\n  \u003cli\u003eMarine and motorhome solar arrays where panel weight and footprint are relevant constraints.\u003c\/li\u003e\n  \u003cli\u003eCommercial ground-mount or rooftop arrays requiring consistent panel specifications across a large order.\u003c\/li\u003e\n  \u003cli\u003eHybrid and backup power systems paired with Victron MultiPlus or Quattro inverter-chargers.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eWhat Is Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1 x Victron Energy 235W 72-cell monocrystalline solar panel (Series 4d)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eInstallation Notes\u003c\/h3\u003e\n\u003cp\u003eSolar panel installation should be carried out by a qualified electrician or MCS-accredited installer. The 72-cell format produces higher string voltages than standard 60-cell panels; string voltage must be calculated carefully to remain within the maximum input voltage of the connected charge controller or inverter. For any grid-connected application, G98 or G99 compliance and DNO notification requirements apply. Mounting must be to a structure rated for the panel's weight and wind\/snow loading for the installation site. MC4 or compatible connectors should be used for all DC wiring, and cables must be rated for outdoor solar DC use.\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":55582786388259,"sku":"SPM042357204","price":146.2,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0863\/9001\/4243\/files\/VoltaconSolar_-_SPM042357204_-_Solar_Panel_235W-72_cells_Mono_1350x880x30mm_series_4d_2.webp?v=1789122488"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0863\/9001\/4243\/collections\/Victron_Energy_Logo_svg_bb2b03b0-0749-44ac-a4e0-f8c03bc95a22.png?v=1789123999","url":"https:\/\/voltaconsolar.eu\/collections\/victron-solar-panels-and-cables.oembed","provider":"VoltaconSolar EU","version":"1.0","type":"link"}